Oem Electrical Connectors

JustJeff · 03-02-2011, 01:01 AM

I'm rebuilding my harness. I was thinking ahead and snipped the water thermo plug (Green rectangular two pin one on the back of the water pump) from a junkyard. That plug is in awesome shape.

My CAS plug is horrible. But I believe I can buy the male terminal pins locally.

Probably going to rebuild my TPS. IIRC the actual male/female plugs are good. But being a N/A harness converted for a turbo swap, the wires were extended and while it's out I want to make sure the patch is in good shape.

03-02-2011, 01:01 AM	#1
JustJeff RCC Contributor Join Date: Mar 2008 Posts: 505 Rep Power: 18	I'm rebuilding my harness. I was thinking ahead and snipped the water thermo plug (Green rectangular two pin one on the back of the water pump) from a junkyard. That plug is in awesome shape. My CAS plug is horrible. But I believe I can buy the male terminal pins locally. Probably going to rebuild my TPS. IIRC the actual male/female plugs are good. But being a N/A harness converted for a turbo swap, the wires were extended and while it's out I want to make sure the patch is in good shape.