Questions on suspension parts

[TitaniumTT]

Easiest way I've found to remove the rear subrame is this.

Jack up the car and remove the exhaust from the cat back
Remove the driveshaft
Remove the muffler heat shields
Reposition jacks underneath "Frame Rails"
Grab two creepers, three jacks and two friends.
Two jacks go at either end of the subframe, and one under the diff.
Lower all three together onto the 2 creepers and slide the whole assembly out.

Takes me all of 25 minutes.

When removing the axles, unscrew the nuts until they are at the end of the stud. Hit with ball pien hammer. Remove the nuts, push the studs out, the axle falls away