Go Back   Rotary Car Club > Tech Discussion > Show your rotary car build up.

Show your rotary car build up. Show off your Rotary Car build!

Reply
 
Thread Tools Display Modes
Old 12-06-2010, 06:39 AM   #1
RICE RACING
Don Mega
 
RICE RACING's Avatar
 
Join Date: Dec 2008
Location: Utopia
Posts: 1,688
Rep Power: 18
RICE RACING will become famous soon enough
I have edited video showing the beast (beating all but 1 F40 and having no respect for tire grip!) , but youtube is going BDC style and failing on me so until then here is some reading

Quote:
Originally Posted by RICE RACING
Are you ready for the results cunts



"Here's the raw Excel data for the fastest 60 to 130 in 9.4 seconds. Do not use data before 60 mph or after 130 mph since I may let up before or after that.

I weighed the car right after the runs:

2,917 lbs (1323kg) without driver
3,113 lbs (1412kg!) with driver "
(note 478bhp rated motor)

Car does 60mph to 85mph in ~2.10 seconds compared to RICESP 2.23 seconds *I need to turn the boost up just a little* ~5k to 7krpm for both vehicles. I estimate my thing has around ~440bhp on ~17psi setting, aiming for honest ~500 honest bhp on 1.5bar boost setting, which should achieve the goal of matching/beating? the F40. My power figure average for the SP is ~270rwkw on my VBOX measure (going off my experience * 1.2 = engine power = ~435bhp)

60mph to 85mph now is .......................... 2.11 seconds basically exactly equal to the USA F40 for which I have a VBOX test from an owner *above* his was on small decent too! so artificially fast in my books.
100-140kmh is 2.10 seconds 70.36 meters (EURO F40 apparently does 2.0 seconds and 67.60 meters but have only ever found one magazine test on that, fastest one ever recorded too btw) listed earlier on.

Basically It's allot faster than the all but one of the Ferrari F40's listed *euro F40 Italian test, probably a boosted up special lol* (USA ones tested by Road and Track I obliterate in same rpm speed tests.)

I have a video of it and will do up a VBOX report showing the boost, back pressure, EGT, Turbine speed, and all the shit I do...... its a very impressive car for what it is. Hiring an air port not far from me for some high speed testing and full performance review. If you compare it to the Domar Jap 500ps cars that cant char the semi slicks as hard as mine nor accelerate no where near as quickly its even more impressive. I love it.

Additional information 17th Dec 2010 test update
60-130mph for RICESP at Aerodrome test is 8.62 seconds (lot faster than the VBOX proof from the F40)
__________________
www.riceracing.com.au
Worlds best
Apex Seals
Coil on Plug
Water Injection
ECU Calibration

Last edited by RICE RACING; 12-19-2010 at 07:24 PM. Reason: 60-130mph Aerodrome test update to Ferrari F40
RICE RACING is offline   Reply With Quote
Old 12-06-2010, 08:37 AM   #2
RICE RACING
Don Mega
 
RICE RACING's Avatar
 
Join Date: Dec 2008
Location: Utopia
Posts: 1,688
Rep Power: 18
RICE RACING will become famous soon enough
http://www.youtube.com/watch?v=k2YVuJg4rSg

As fast as a Pagani Zonda and Ferrari F40, I'll put up the VBOX proof later

Quote:
Originally Posted by RICE RACING
Quote:
Originally Posted by rotorpsi1
Quote:
And that was on Rice's private test track, not some traction prepped drag strip. I seem to recall that the 'supercar' benchmark of the Ford GTHO was around 14.4 or even as low as 14.1. You'd run that with the air con and stereo pumping!

Pete, out of inane curiousity.... what is the highest peak g-force you've managed to log or come across on 'street' tyres? .72 looks pretty good.
i have had cars pull over 1G of accelleration (around 1-1.15G actually)on the street on street tyres,all have been evo's or wrx's or sti's though,i have had my rx7 as hi as 0.95G on the street,and some other cars in the hi 0.8's,all rwd and in the 12 sec bracket.that should give u an idea

i can garauntee the peak g reading u get on the v box will be in first gear,unless ur getting heavy wheelspin,but i doubt it,adn a low 13sec car will not pull 0.72G in second gear thats for sure.

my 1150kg rx7 with 360rwhp and toyo proxes tyres does just over 0.8G in second gear,thats zero wheelpsin and all power,and about 0.65G in 3rd,to give u an idea again,thats harder than most cars pull in first,and im in 3rd

also,u need a G graph,as peak doesnt give u a true idea,if u have huge grip and no power,u can give a huge dump and create a massive g froce spike on launch but it may only last an instant,then falls away to the normal g force.
Please tell me what G you have @ exactly 130kph in 3rd gear when doing a pull from 100 to 160kph *no gear change shunts*.... If you can tell me any G between revs of 6600rpm to 8000rpm in 3rd gear, but preferably at the above road speed to compare and apple to an apple
I tested a car today on road tires 235's that did a honest 0.657G :bow: which is 35% more G than a Pagani Zonda !!!!! which is at its power peak at that speed.
This car 11.4% wheel slip (so near perfect traction capacity) @ 24psi gauge boost pressure 2.6bar absolute pressure *948kpa and 35 deg C! test conditions*.Pump fuel and my WATER INJECTION

The car I tested has 260% more acceleration force than a Spirit R type A @ 130kph which in its own right is not a slow car :laugh:

**110kph to 144kph** (all listed in one gear with no changes involved)
1.55 sec in 54 meters
^ test car
1.83 sec in 65 meters
^ Pagani Zonda
2.42 sec in 86 meters
^ F360 Ferrari
2.91 sec in 103 meters
^ 230rwkw Spirit R Type A
RICESP is 1.84 seconds in 65.38 meters
*Pagani Zonda its test is slighly down hill so I will call myself just as fast! probably faster, have more top end G *acceleration* where as it's Mazzive 6+lt N/A V12 has a superior spread of power*. (It traps 128mph in 400m test) we both do similar 0-100kmh times for what its worth (within 0.1 seconds). I'll update with a full test when time permits along with overlays between the two cars


EDIT (additional info, back up of first result)
17th Dec 2010 TESTS RICESP is 1.82 seconds in 64.53 meters *From Aerodrome test* SO ITS *officially* FASTER THAN A ZONDA !
__________________
www.riceracing.com.au
Worlds best
Apex Seals
Coil on Plug
Water Injection
ECU Calibration

Last edited by RICE RACING; 12-19-2010 at 06:54 PM. Reason: Info tit bit from my VBOX thread on AR to provide some context
RICE RACING is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:02 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com