Part out: Fully built s5 turbo vert

87 t-66 · 09-14-2010, 07:32 AM

UPDATED 11/18/10

================================================== =========
Haltech E6X kit – All sensors included (3bar MAP, new IAT, new coolant temp, new TPS w/ bracket), the harness is 75% finished. You would need to run power, ground and a couple other wires (all labeled). Has new injector clips. All relays/fuses included. Comes with modified intake elbow for larger IAT sensor. - $800
PIC: http://i30.photobucket.com/albums/c3...t/DSC02246.jpg
PIC: http://i30.photobucket.com/albums/c3...t/DSC02245.jpg
================================================== =========
FEED gauge cluster – Super rare - $500 shipped
PIC: http://i30.photobucket.com/albums/c3...s/DSC01269.jpg
================================================== =========
ACT clutch & HD Pressure Plate - new, part numbers 3000204 and MZ010 - $260
PIC: http://i30.photobucket.com/albums/c3...t/DSC02282.jpg
================================================== =========
Racing beat front / Eibach rear sway bars w/ adjustable RB endlinks (one set new, one used) – comes with all 4 adjustable end links, all brackets included, I would like to sell as a set but if nobody wants everything I will split them up. - $350
PIC:http://i30.photobucket.com/albums/c3...t/DSC02327.jpg
================================================== =========
MSD 6A - $80
PIC: http://i30.photobucket.com/albums/c3...t/DSC02286.jpg
================================================== =========
Center console (dusty in pics), no cracks, good condition - $40
PIC: http://i30.photobucket.com/albums/c3...t/DSC02284.jpg
PIC: http://i30.photobucket.com/albums/c3...t/DSC02285.jpg
================================================== =========
Top – good condition, small tear as shown in the picture - $180
PIC: http://i30.photobucket.com/albums/c3...t/DSC02315.jpg
PIC: http://i30.photobucket.com/albums/c3...t/DSC02260.jpg
PIC: http://i30.photobucket.com/albums/c3...t/DSC02266.jpg
================================================== =========
T2 Slave cylinder w/ braided line - $35
PIC: http://i30.photobucket.com/albums/c3...t/DSC02331.jpg
================================================== =========
S4 vert tail lights w/ center section - $80
PIC: http://i30.photobucket.com/albums/c3...t/DSC02333.jpg
================================================== =========
S5 T2 N370 AFM - $70
PIC: http://i30.photobucket.com/albums/c3...e/DSC02196.jpg
================================================== =========
10AE tail lights - $60
PIC: http://i30.photobucket.com/albums/c3...e/DSC02160.jpg
PIC: http://i30.photobucket.com/albums/c3...e/DSC02161.jpg
PIC: http://i30.photobucket.com/albums/c3...e/DSC02162.jpg
================================================== =========
Black dash – comes as pictured (unless someone buys the demister vents and idiot light surround first) minus the plastic piece under the steering column - $125
PIC: http://i30.photobucket.com/albums/c3...t/DSC02313.jpg
PIC: http://i30.photobucket.com/albums/c3...t/DSC02312.jpg
================================================== ========
Plastics - $50
PIC: http://i30.photobucket.com/albums/c3...t/DSC02314.jpg
PIC: http://i30.photobucket.com/albums/c3...t/DSC02307.jpg
================================================== ========

Carbon fiber t2 hood - $400 (pick up only)
JDM s5 gauge cluster (I have 3 of them) - $25, $40, & $50
Tomei 1.5 way diff - $600
Front plastic undertray - $40
Fuel pump sending unit – great shape, comes with new allen head mounting screws - $40
Targa section – great condition - $50
Doors - $50/each
S4 T2 waterpump housing - $25
Window glass (large piece) - $50/both, $30/side
Window glass (small piece) - $40/both, $25/side
Headlight assemblies - $25/each
Door handles - $80/both
Door/trunk/targa seals - $80
Lock set w. key (doors, trunk, ignition) - $60

Interior – Black
Unbroken demister vents – $30
Unbroken idiot light (clock) surround - $30
Driver & passenger window regulators – both in good working condition - $180/both
Interior door handles / cups - $35
Gauge cluster - $40
Door sils - $15
Black carpet - $75
Windguard/rear carpet piece - $40
Gauge cluster surround – comes with switches, was told by the previous owner the headlight and turn signal switches were rebuilt - $75

Jdmeg2 · 09-14-2010, 01:49 PM

Looking for a s5 shortblock. if you change your mind pm me please. Thanks!

infernosg · 09-14-2010, 01:56 PM

May be interested in a couple items:

1. TII side skirts. What exactly is a scrape/tear? Scrapes can always be filled and repainted (something I plan on doing anyway) but an actual tear through the part would be more difficult to fix.

2. Rear camber bar. Which type is it and what's the condition? Does it look as rusty as the endlink in the one picture?

I'm down in Cinci so it wouldn't take much to take the trip up to grab a couple things.

87 t-66 · 09-14-2010, 02:43 PM

Quote:

Originally Posted by infernosg

May be interested in a couple items:

1. TII side skirts. What exactly is a scrape/tear? Scrapes can always be filled and repainted (something I plan on doing anyway) but an actual tear through the part would be more difficult to fix.

2. Rear camber bar. Which type is it and what's the condition? Does it look as rusty as the endlink in the one picture?

I'm down in Cinci so it wouldn't take much to take the trip up to grab a couple things.

there is a small crack/tear in one piece of the sideskirt (see pics). it should not be difficult to fix. there is no plastic missing. the camber bar is the red one on mazdatrix's site and is in good condition.

87 t-66 · 09-16-2010, 09:38 AM

SOLD:

1600's
steering column cover
oil cooler lines
Top cover “boot”
manual rack
floor mats

FerociousP · 09-16-2010, 11:48 AM

does the clutch and PP come with the throwout and pilot bearing?

87 t-66 · 09-16-2010, 11:50 AM

i have a new OEM pilot and throw out bearing i could include for a little extra...i also have the pilot bearing seal

FerociousP · 09-16-2010, 01:05 PM

Quote:

Originally Posted by 87 t-66

i have a new OEM pilot and throw out bearing i could include for a little extra...i also have the pilot bearing seal

and that little extra would be?

87 t-66 · 09-16-2010, 01:23 PM

mazdatrix prices for those 3 items is $60-$65 + shipping...how about $40 if you buy the clutch and PP? again they are brand new OEM...

87 t-66 · 09-19-2010, 08:50 AM

.

87 t-66 · 09-28-2010, 10:39 AM

updated list

infernosg · 10-16-2010, 10:26 AM

Hey sorry for the lack of reply; going to have to pass on the side skirts. Do you still have the "JDM" exterior? MY FTP lenses are fubar'd and I don't feel like paying $200 to replace them. How hard is it to wire up the JDM ones? Also, what color is the rear bumper trim?

tevan · 10-16-2010, 11:45 PM

Sorry didn't have time to read the entire thread but is that $100 shipped for the jdm FTP?

slidinsilly · 11-16-2010, 05:18 PM

will the s4 t2 axles fit my s4 na rear?

87 t-66 · 11-16-2010, 07:55 PM

Quote:

Originally Posted by slidinsilly

will the s4 t2 axles fit my s4 na rear?

no and they are sold...i just updated the list

09-14-2010, 07:32 AM	#1
87 t-66 Rotary Fanatic Join Date: Feb 2008 Location: Columbus, OH Posts: 161 Rep Power: 18	Part out: Fully built s5 turbo vert UPDATED 11/18/10 ================================================== ========= Haltech E6X kit – All sensors included (3bar MAP, new IAT, new coolant temp, new TPS w/ bracket), the harness is 75% finished. You would need to run power, ground and a couple other wires (all labeled). Has new injector clips. All relays/fuses included. Comes with modified intake elbow for larger IAT sensor. - $800 PIC: http://i30.photobucket.com/albums/c3...t/DSC02246.jpg PIC: http://i30.photobucket.com/albums/c3...t/DSC02245.jpg ================================================== ========= FEED gauge cluster – Super rare - $500 shipped PIC: http://i30.photobucket.com/albums/c3...s/DSC01269.jpg ================================================== ========= ACT clutch & HD Pressure Plate - new, part numbers 3000204 and MZ010 - $260 PIC: http://i30.photobucket.com/albums/c3...t/DSC02282.jpg ================================================== ========= Racing beat front / Eibach rear sway bars w/ adjustable RB endlinks (one set new, one used) – comes with all 4 adjustable end links, all brackets included, I would like to sell as a set but if nobody wants everything I will split them up. - $350 PIC:http://i30.photobucket.com/albums/c3...t/DSC02327.jpg ================================================== ========= MSD 6A - $80 PIC: http://i30.photobucket.com/albums/c3...t/DSC02286.jpg ================================================== ========= Center console (dusty in pics), no cracks, good condition - $40 PIC: http://i30.photobucket.com/albums/c3...t/DSC02284.jpg PIC: http://i30.photobucket.com/albums/c3...t/DSC02285.jpg ================================================== ========= Top – good condition, small tear as shown in the picture - $180 PIC: http://i30.photobucket.com/albums/c3...t/DSC02315.jpg PIC: http://i30.photobucket.com/albums/c3...t/DSC02260.jpg PIC: http://i30.photobucket.com/albums/c3...t/DSC02266.jpg ================================================== ========= T2 Slave cylinder w/ braided line - $35 PIC: http://i30.photobucket.com/albums/c3...t/DSC02331.jpg ================================================== ========= S4 vert tail lights w/ center section - $80 PIC: http://i30.photobucket.com/albums/c3...t/DSC02333.jpg ================================================== ========= S5 T2 N370 AFM - $70 PIC: http://i30.photobucket.com/albums/c3...e/DSC02196.jpg ================================================== ========= 10AE tail lights - $60 PIC: http://i30.photobucket.com/albums/c3...e/DSC02160.jpg PIC: http://i30.photobucket.com/albums/c3...e/DSC02161.jpg PIC: http://i30.photobucket.com/albums/c3...e/DSC02162.jpg ================================================== ========= Black dash – comes as pictured (unless someone buys the demister vents and idiot light surround first) minus the plastic piece under the steering column - $125 PIC: http://i30.photobucket.com/albums/c3...t/DSC02313.jpg PIC: http://i30.photobucket.com/albums/c3...t/DSC02312.jpg ================================================== ======== Plastics - $50 PIC: http://i30.photobucket.com/albums/c3...t/DSC02314.jpg PIC: http://i30.photobucket.com/albums/c3...t/DSC02307.jpg ================================================== ======== Carbon fiber t2 hood - $400 (pick up only) JDM s5 gauge cluster (I have 3 of them) - $25, $40, & $50 Tomei 1.5 way diff - $600 Front plastic undertray - $40 Fuel pump sending unit – great shape, comes with new allen head mounting screws - $40 Targa section – great condition - $50 Doors - $50/each S4 T2 waterpump housing - $25 Window glass (large piece) - $50/both, $30/side Window glass (small piece) - $40/both, $25/side Headlight assemblies - $25/each Door handles - $80/both Door/trunk/targa seals - $80 Lock set w. key (doors, trunk, ignition) - $60 Interior – Black Unbroken demister vents – $30 Unbroken idiot light (clock) surround - $30 Driver & passenger window regulators – both in good working condition - $180/both Interior door handles / cups - $35 Gauge cluster - $40 Door sils - $15 Black carpet - $75 Windguard/rear carpet piece - $40 Gauge cluster surround – comes with switches, was told by the previous owner the headlight and turn signal switches were rebuilt - $75 __________________ 87 T2 90 T2 'Vert Last edited by 87 t-66; 11-18-2010 at 08:16 AM.

09-14-2010, 01:56 PM	#3
infernosg IT'S ALIVE! Join Date: Dec 2009 Location: Richmond, VA Posts: 811 Rep Power: 16	May be interested in a couple items: 1. TII side skirts. What exactly is a scrape/tear? Scrapes can always be filled and repainted (something I plan on doing anyway) but an actual tear through the part would be more difficult to fix. 2. Rear camber bar. Which type is it and what's the condition? Does it look as rusty as the endlink in the one picture? I'm down in Cinci so it wouldn't take much to take the trip up to grab a couple things. __________________ '86 Mazda RX-7 Base '79 Mazda RX-7 GS

09-16-2010, 09:38 AM	#5
87 t-66 Rotary Fanatic Join Date: Feb 2008 Location: Columbus, OH Posts: 161 Rep Power: 18	SOLD: 1600's steering column cover oil cooler lines Top cover “boot” manual rack floor mats __________________ 87 T2 90 T2 'Vert Last edited by 87 t-66; 09-16-2010 at 03:10 PM.

09-16-2010, 11:48 AM	#6
FerociousP I-had-a-bad-experience... Join Date: Feb 2008 Location: M'boro Posts: 1,046 Rep Power: 19	does the clutch and PP come with the throwout and pilot bearing? __________________ '15 Juke Nismo '06 MX-5 GT SOLD '04 S Silver RX-8 GT Track Day Use SOLD '90 Black TII vert w/ Sprint RE stock port/turbo DD dyno (242.6whp@5500rpm @12psi 8psi@redline) and (250ftlbtq@4800rpm @13psi) SOLD '89 GTUs 6p TII SOLD, '87 sport SOLD, '79 SA stock SOLD '91 B2600i 4x4 w/ Rx-8 LSD SOLD

09-16-2010, 11:50 AM	#7
87 t-66 Rotary Fanatic Join Date: Feb 2008 Location: Columbus, OH Posts: 161 Rep Power: 18	i have a new OEM pilot and throw out bearing i could include for a little extra...i also have the pilot bearing seal __________________ 87 T2 90 T2 'Vert

09-14-2010, 01:49 PM	#2
Jdmeg2 The Newbie Join Date: Sep 2010 Posts: 2 Rep Power: 0	Looking for a s5 shortblock. if you change your mind pm me please. Thanks!

09-16-2010, 01:23 PM	#9
87 t-66 Rotary Fanatic Join Date: Feb 2008 Location: Columbus, OH Posts: 161 Rep Power: 18	mazdatrix prices for those 3 items is $60-$65 + shipping...how about $40 if you buy the clutch and PP? again they are brand new OEM... __________________ 87 T2 90 T2 'Vert

09-19-2010, 08:50 AM	#10
87 t-66 Rotary Fanatic Join Date: Feb 2008 Location: Columbus, OH Posts: 161 Rep Power: 18	. __________________ 87 T2 90 T2 'Vert Last edited by 87 t-66; 10-19-2010 at 09:11 AM.

09-28-2010, 10:39 AM	#11
87 t-66 Rotary Fanatic Join Date: Feb 2008 Location: Columbus, OH Posts: 161 Rep Power: 18	updated list __________________ 87 T2 90 T2 'Vert

10-16-2010, 10:26 AM	#12
infernosg IT'S ALIVE! Join Date: Dec 2009 Location: Richmond, VA Posts: 811 Rep Power: 16	Hey sorry for the lack of reply; going to have to pass on the side skirts. Do you still have the "JDM" exterior? MY FTP lenses are fubar'd and I don't feel like paying $200 to replace them. How hard is it to wire up the JDM ones? Also, what color is the rear bumper trim? __________________ '86 Mazda RX-7 Base '79 Mazda RX-7 GS

10-16-2010, 11:45 PM	#13
tevan The Newbie Join Date: Apr 2009 Posts: 8 Rep Power: 0	Sorry didn't have time to read the entire thread but is that $100 shipped for the jdm FTP?

11-16-2010, 05:18 PM	#14
slidinsilly The Newbie Join Date: Oct 2010 Posts: 4 Rep Power: 0	will the s4 t2 axles fit my s4 na rear?