|
|||||||
| RX-7 1st Gen Specific (1979-85) RX-7 1979-85 Discussion including performance modifications and technical support sections |
 |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 1st Gen Specific (1979-85) RX-7 1979-85 Discussion including performance modifications and technical support sections |
|
|
|
Thread Tools | Display Modes |
|
|
10-19-2010, 03:43 PM
|
#1 |
|
I've been Wankeled!
Join Date: Apr 2010
Location: Mildmay, Ontario, Canada
Posts: 260
Rep Power: 16  |
Ya to me that sounds like a fuel starvation issue. Check your fuel filter, and your actuall fuel flow through the carb. Might have a stuck needle valve or something. Rebuilding the carb isn't a bad idea either. A 600 holley is plenty big for a 12A that isn't heavily ported, but it should still start and run. If it was too rich, spraying the carb cleaner to get it started would make it worse rather than better.
__________________
1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place |
|
|
|
| Bookmarks |
|
|
Hybrid Mode
