Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild - Page 39

***TitaniumTT*** · 09-29-2010, 09:04 PM

Quote:

Originally Posted by vex

B,

Would you mind taking some shots on how your exhaust is hung on the pretty, pretty, princess?

I need some motivation.

Sure thing T, to be honest though, it's pretty close to stock....

Quote:

Originally Posted by Nismo

Damn kind of happy I am building my own mounts! Thanks for the heads up, definitely high on the drivers side, or low on the passenger side... I will keep this in mind thanks for that Brian!

I will post pictures when I build mine in the new Fab Section.

no no no man.... Keep the pan LEVEL in the car. The problem with the Banzai mounts is they want to tweak the engine counter-clockwise as seen looking down the e-shaft from the front of the car and from looking down on the engine from the top of the car. The engine is in a position that is really counter-intuitive

incubus · 09-30-2010, 01:18 AM

Oh man. One day I'll read through all of this + your other build threads too. You're definitely my favorite builder that I've seen. Your car looks great. Keep up all the good work!

Sharingan 19 · 09-30-2010, 09:54 AM

I've spent the last 3 days reading this (woulda been 2 if you had a secretary or a blackberry

...) Simply AMAZING!

Big fan of custom stuff, but w/o welding skills I'm somewhat limited. I had a pretty good idea what I wanted to do when I resto-mod my car but thanks to this, I might have to re-evaluate that plan....time to look into some welding classes....as soon as I finish these other classes.

jtbshaw · 09-30-2010, 01:58 PM

Good work, as always, B. If I'm not mistaken, you will have to raise the pinion to accomadate the shorter shaft. Of course, just as you mentioned, this is coming from years of building rock crawlers and 4x4s.

And, before you say it...I'll get a build thread up soon with my chit. Just been travelling a good bit with work yo.

Todd B.

Roen · 10-07-2010, 12:25 AM

I'm so jealous I want to steal your keys, while pouring a gallon of halal hot sauce down your back.

***TitaniumTT*** · 10-07-2010, 12:34 AM

Quote:

Originally Posted by incubus

Oh man. One day I'll read through all of this + your other build threads too. You're definitely my favorite builder that I've seen. Your car looks great. Keep up all the good work!

Thanks brother! I really appreciate it. How far did you get?

Quote:

Originally Posted by Sharingan 19

I've spent the last 3 days reading this (woulda been 2 if you had a secretary or a blackberry

...) Simply AMAZING!

I do have those... but I actually appreciate how my build threads turn into blogs.... I kinda like it.

Quote:

Originally Posted by Sharingan 19

Big fan of custom stuff, but w/o welding skills I'm somewhat limited. I had a pretty good idea what I wanted to do when I resto-mod my car but thanks to this, I might have to re-evaluate that plan....time to look into some welding classes....as soon as I finish these other classes.

I would really rec learning how to weld. I'm not sure classes are really needed though. I never took them. I was given a few quick lessons with a MIG welder when I was working as a mechanic. When I left that job and had some shit to weld up, I went to Sears and bought a welder. I literally burned that one up and finally bought a MillerMatic 175.

When I started the planning for this build I new that I wanted to do alot out of AL so I went out and bought the TIG welder. Plugged it in and went hog wild. I needed some help with that, no one I knew knows how to TIG so I bought a few books, did some research, spoke to a marine fabricator that we do some business with and stopped by his shop a few times and always re-directed the conversations... after that it was just practive practice practice.

Do it man, you won't regret it.

Quote:

Originally Posted by jtbshaw

Good work, as always, B. If I'm not mistaken, you will have to raise the pinion to accomadate the shorter shaft. Of course, just as you mentioned, this is coming from years of building rock crawlers and 4x4s.

It's all sorts of wierd angles man. The tranny is longer, so the shaft is shorter..... it's bass ackwards from lifting a rig... or so I think. I dunno, I still need to get the digital angle finder out and get the data to send off to the driveshaft manifacturer.

Quote:

Originally Posted by jtbshaw

And, before you say it...I'll get a build thread up soon with my chit. Just been travelling a good bit with work yo.

Todd B.

traveling for work is good stuff.... and yeah bro, you're right, I was about to say it

See ya soon brotha

Force13b · 10-12-2010, 01:03 PM

Nice work there Bri your attention to detail is border line OCD

EJayCe996 · 10-12-2010, 07:32 PM

Remember when we had that whole discussion about fuel pumps and noise? My friend with a full bridge 13b-re FC just primed his FULLY parallel twin Bosch 044 fuel system.

***TitaniumTT*** · 10-12-2010, 09:00 PM

Quote:

Originally Posted by Roen

I'm so jealous I want to steal your keys, while pouring a gallon of halal hot sauce down your back.

haahahha... you should be jealous, there was an S5 TII at this weekends auto-x. He was traveling most of the course in 1st bouncing the thing off the rev limiter while I pulled out of the gate and was in 2nd before the first turn and stayed there the entire time

It was epic... the ratios are fucking awesome!

Quote:

Originally Posted by Force13b

Nice work there Bri your attention to detail is border line OCD

Borderline? Seriously?

Quote:

Originally Posted by EJayCe996

Remember when we had that whole discussion about fuel pumps and noise? My friend with a full bridge 13b-re FC just primed his FULLY parallel twin Bosch 044 fuel system.

So is he going to swap over to some Denso's?

EJayCe996 · 10-12-2010, 09:28 PM

Quote:

Originally Posted by TitaniumTT

So is he going to swap over to some Denso's?

No, he's keeping it but he does believe the loping will be drowned out by the pumps

***TitaniumTT*** · 10-12-2010, 09:35 PM

Fast forward to 2:30 and 10:00

***TitaniumTT*** · 10-12-2010, 09:51 PM

I was hoping to get this for Johnson showing all 6 gears but instead all we get is a bunch of wind noise.... but we do see how fast we get through the first 3 gears. Rev limiter is still set a little low, top of 2nd is 57, top of 3rd is 75 I think? Either way

Nismo · 10-13-2010, 05:40 AM

Your car appears to be slow... What gives

Force13b · 10-13-2010, 11:39 AM

Quote:

Originally Posted by TitaniumTT

Borderline? Seriously?

well you are borderline heterosexual.

MaczPayne · 10-13-2010, 02:37 PM

Damn, really winds up fast with that trans! Must be an ass-tucker with the sequentials thrown into the mix!

10-07-2010, 12:25 AM	#575
Roen Evil Club Mod Join Date: Feb 2008 Posts: 183 Rep Power: 18	I'm so jealous I want to steal your keys, while pouring a gallon of halal hot sauce down your back. __________________ Ex-King of the Loop / Captain Guardrail / Master Crab Rapist / Evil Crop Dusting Mod

10-12-2010, 07:32 PM	#578
EJayCe996 PPP-P-P-P-POWER! Join Date: Feb 2008 Location: North GP, TX Posts: 283 Rep Power: 18	Remember when we had that whole discussion about fuel pumps and noise? My friend with a full bridge 13b-re FC just primed his FULLY parallel twin Bosch 044 fuel system. __________________ 1. Walk through a row of 22", or larger, rims 2. Say you love dubstep 3. ????? 4. PROFIT! Axiomatic: Total cacology.

10-12-2010, 09:35 PM	#581
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Fast forward to 2:30 and 10:00 __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

10-12-2010, 09:51 PM	#582
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	I was hoping to get this for Johnson showing all 6 gears but instead all we get is a bunch of wind noise.... but we do see how fast we get through the first 3 gears. Rev limiter is still set a little low, top of 2nd is 57, top of 3rd is 75 I think? Either way __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

10-13-2010, 05:40 AM	#583
Nismo 400WHP or bust Join Date: Mar 2008 Location: Kincardine, Ontario Canada Posts: 165 Rep Power: 18	Your car appears to be slow... What gives __________________ 1986 GXL- Being built with a 13B RE... http://www.rotarycarclub.com/rotary_...ead.php?t=9602 1986 Base-RB Exhaust, HKS filter, Solid Aluminum motor mounts, S5 TII motor, ACT Clutch, HKS SSQV, Light Weight Flywheel, Haltech E6X, 720cc 2ndaries, Koni Yellows, Tein Springs Koyo Rad, 250 WHP 230 FTLBS Stock turbo, and stock IC at 10psi. RIP!! The daily bitch- 1995.5 Toyota Tacoma- Trueflow airfilter, and Bilstein HD shocks. 2009 Toyota Corolla "S" TRD Filter... 40MPG

09-30-2010, 01:18 AM	#572
incubus rotor's are in my blood Join Date: Sep 2010 Posts: 8 Rep Power: 0	Oh man. One day I'll read through all of this + your other build threads too. You're definitely my favorite builder that I've seen. Your car looks great. Keep up all the good work!

09-30-2010, 09:54 AM	#573
Sharingan 19 Rotary Fanatic Join Date: May 2010 Posts: 138 Rep Power: 16	I've spent the last 3 days reading this (woulda been 2 if you had a secretary or a blackberry ...) Simply AMAZING! Big fan of custom stuff, but w/o welding skills I'm somewhat limited. I had a pretty good idea what I wanted to do when I resto-mod my car but thanks to this, I might have to re-evaluate that plan....time to look into some welding classes....as soon as I finish these other classes.

09-30-2010, 01:58 PM	#574
jtbshaw ORD - Old Rotary Dude Join Date: Feb 2008 Location: Pelham, AL Posts: 319 Rep Power: 18	Good work, as always, B. If I'm not mistaken, you will have to raise the pinion to accomadate the shorter shaft. Of course, just as you mentioned, this is coming from years of building rock crawlers and 4x4s. And, before you say it...I'll get a build thread up soon with my chit. Just been travelling a good bit with work yo. Todd B.

10-12-2010, 01:03 PM	#577
Force13b cxxxx\|::::::::::::> Join Date: Nov 2009 Posts: 315 Rep Power: 16	Nice work there Bri your attention to detail is border line OCD

10-13-2010, 02:37 PM	#585
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal Posts: 442 Rep Power: 18	Damn, really winds up fast with that trans! Must be an ass-tucker with the sequentials thrown into the mix! __________________ Johnson TA FC in the works!