Power to Cigarette Lighter

SLOASFK · 03-31-2008, 08:45 PM

to unplug it, your best bet would be to remove the gauge cluster, good, cover, etc. It's only 2 screws and it pulls out pretty easy. from there, it's just a plug in the back. It needs a piece of metal touching the back and the sides in order to complete the circuit, but to be safe, I'd unplug it too.

0110-M-P · 03-31-2008, 09:04 PM

I'm guessing you are going to mount it like I have mounted mine (using a power adapter plug)...so if you are, just buy a power adapter plug that uses a fuse in it...remove the fuse and you are set.

03-31-2008, 09:04 PM	#2
0110-M-P Avid Installer Join Date: Mar 2008 Location: Raleigh, NC Posts: 71 Rep Power: 18	I'm guessing you are going to mount it like I have mounted mine (using a power adapter plug)...so if you are, just buy a power adapter plug that uses a fuse in it...remove the fuse and you are set. __________________ 1993 T04Z BB RX-7 1983 RX-7 GSL M-P Racing Project Blog

03-31-2008, 08:45 PM	#1
SLOASFK Rotary Fanatic Join Date: Feb 2008 Location: Lancaster, PA Posts: 155 Rep Power: 18	to unplug it, your best bet would be to remove the gauge cluster, good, cover, etc. It's only 2 screws and it pulls out pretty easy. from there, it's just a plug in the back. It needs a piece of metal touching the back and the sides in order to complete the circuit, but to be safe, I'd unplug it too.