who makes a good wideband?

dudemaaan · 08-24-2010, 09:42 AM

I run the innovate lc1 and have had no problems with it in almost 3 years now. Sensor life is usually shortened if you have it too close to the turbo. Best to have it just before the midpipe.

I used to avoid AEM electronics after a bad experience with their Pnp ecu, but that was 7 years ago and I hear they are better now.

This wideband of theirs looks pretty cool.

http://www.wannaspeed.com/index.php?...roducts_id=328

Can connect over wifi, displays on iphone, itouch, android, and storm 2, has 5v output for dataloging, can connect to external gauge, and probably one of the coolest things I had never seen before in a wideband controller is dual EGT probe inputs for logging EGT's along with AFR's.

08-24-2010, 09:42 AM	#14
dudemaaan Rotary Fanatic Join Date: Mar 2008 Location: Brenham, TX Posts: 335 Rep Power: 18	I run the innovate lc1 and have had no problems with it in almost 3 years now. Sensor life is usually shortened if you have it too close to the turbo. Best to have it just before the midpipe. I used to avoid AEM electronics after a bad experience with their Pnp ecu, but that was 7 years ago and I hear they are better now. This wideband of theirs looks pretty cool. http://www.wannaspeed.com/index.php?...roducts_id=328 Can connect over wifi, displays on iphone, itouch, android, and storm 2, has 5v output for dataloging, can connect to external gauge, and probably one of the coolest things I had never seen before in a wideband controller is dual EGT probe inputs for logging EGT's along with AFR's. __________________ 500+ HP thanks to: Fast reacting IAT sensor thread! Mechanical Pre-turbo Water Injection Thread Dual Stock fuel pumps Thread T2 differential swap! Last edited by dudemaaan; 08-24-2010 at 09:47 AM.