Optimal Fuel System setup for carbs?

tom93r1 · 03-31-2008, 10:25 AM

I have a Carter pump that needs to be installed, dont remember which model number. Its the 6psi, 72GPG one. Going to dead head it into my Weber, as webercarbs.com recommends.

FC Zach · 04-01-2008, 12:37 AM

Aeromotive pressure regulator, 6AN lines and fittings, and Chevy TBI style fuel pump. Went with this fuel pump because it's an in-tank pump, easily accessable, cheap, and fuel pressure on TBI pumps are low enough to be regulated. (I think I remember it being around 12 psi) You must use a bypass style regulator since the pump holds pressure after shut off like any other EFI pump.

04-01-2008, 12:37 AM	#2
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN Posts: 2,267 Rep Power: 20	Aeromotive pressure regulator, 6AN lines and fittings, and Chevy TBI style fuel pump. Went with this fuel pump because it's an in-tank pump, easily accessable, cheap, and fuel pressure on TBI pumps are low enough to be regulated. (I think I remember it being around 12 psi) You must use a bypass style regulator since the pump holds pressure after shut off like any other EFI pump. Last edited by FC Zach; 04-01-2008 at 12:43 AM. Reason: disclaimer

03-31-2008, 10:25 AM	#1
tom93r1 Rotary Fan in Training Join Date: Feb 2008 Posts: 45 Rep Power: 0	I have a Carter pump that needs to be installed, dont remember which model number. Its the 6psi, 72GPG one. Going to dead head it into my Weber, as webercarbs.com recommends.