Moving sale! 2nd Gen RX-7 Parts

[vex]

Some more stuff:

Fuse cover
Modified secondary fuel rail (no guarantee on if it holds pressure or not)
AC Pulley Wheel and Clutch
Aluminum Stock (Flat and angled)
Plastic intake piping and coupler (needs an o-ring to function properly)

(A hell of a lot more to come)

[vex]

Here's some more:

Master Clutch Cylinder (worked when pulled, more than likely will need a rebuild)--It's currently boxed
AC Coolant Temperature Sensor (it's the sensor the computer uses to make sure you're not over heating the car when you try to flip on the AC)
Weather Seal (for custom projects. It's the same type of seal used to stop drafts on doors)
Some random tool that was in my car when I bought it (I think it's original tool supplied by mazda--may not be)
20 PSI Racing radiator cap from AFCO.

More to come

[vex]

More stuff.

Inner coolant seal (only 1). I got this in a package, it was extra I'd like to see around $15 for it plus shipping, but of course it's obo. It's still new, hence why it's still in the wrapping bag it originally came from. I got this seal from Atkins (he should remember me asking him if he's ever heard anyone getting an extra seal before)

Complete door weather stripping (I believe for both doors). It's the maroon color

Rats nest with check valve and a few solenoids (still have pig tails on 'em).

Brake ducts

Air pump

[vex]

Crank Angle Sensor (CAS)

Charcoal Canister

NA FC Fuel Pump

Bag full of parts (mostly banjo bolt type stuff, and a few miscellaneous things)

Oil Pedestal

[vex]

Cruise Control Actuator

Random Brackets

Horn

Blue Clip Solenoid for Rats Nest

Emissions Pig Tails

Brand New Oil Pan Gasket

[vex]

Some more stuff (and there will be some good things later on too)

Some after market exhaust tips. They fit the stock exhaust, and to be quite honest make the end of the exhaust actually fit the car. It's amazing. Will need some work on one (grind out the old exhaust tip that I just cut off as to not damage the tip).

Brand new Mazda Trix side marker lenses (I'd like $20 for the pair, but of course obo)

Front blinker lenses (these are for the same side, I just don't know which side)

Random NPT to Barbed Hose fittings

Old spider hoses from the rats nest in fair condition... you know... for that stock look?

[vex]

Hey look: Some more stuff.

Stock shifter boot and E-Brake plastics... again, for that stock look everyone is going for.

Random bag of bolts, lug nuts, stock brake lines, and a host of other things I took off the car or replaced. (Pending sale)

Bag full of the secondary throttle plates you remove when porting and polishing the throttle body. Also includes all the hardware necessary for the system.

Random bag of nuts/bolts I think (Pending Sale)

Random nuts, bolts, NPT to -AN fittings, and a host of other stuff. (Pending Sale)