How this idea? 20B + RX8 Transmission

Rotary Inspired · 05-29-2010, 11:58 AM

Titanium,

They were just replacing them. I had a 2nd gear grind occassionally on my 8 when I had it w/ the Aisin trans. I have yet to take the Aisin tranny apart so you may know more than me here on the interals, but I haven't had any problems w/ the TII tranny behind the 20B I helped w/ and that is where I make my recomendations. I just can't imagine putting down that much power the added torque the 20B produces and expecting the 8 tranny to hold. It might be better w/ straight cut gears ie dog box, but again I have not tried. I am just going on what I have seen and had a hand in.

05-29-2010, 11:58 AM	#1
Rotary Inspired Rotary Fan in Training Join Date: Feb 2008 Location: SW OKC Posts: 75 Rep Power: 18	Titanium, They were just replacing them. I had a 2nd gear grind occassionally on my 8 when I had it w/ the Aisin trans. I have yet to take the Aisin tranny apart so you may know more than me here on the interals, but I haven't had any problems w/ the TII tranny behind the 20B I helped w/ and that is where I make my recomendations. I just can't imagine putting down that much power the added torque the 20B produces and expecting the 8 tranny to hold. It might be better w/ straight cut gears ie dog box, but again I have not tried. I am just going on what I have seen and had a hand in. __________________ If you wanna become ASE certified buy the RX7.