Constructing your own Intake Manifold

RotorDad · 05-06-2010, 11:31 PM

How long are you doing the intake runners, what material, where are you placing the throttle body & what dimensions were you using for the plenum? You maybe able to make or have someone fab up a pipe to do the transition you want.

vex · 05-11-2010, 10:20 AM

Quote:

Originally Posted by RotorDad

How long are you doing the intake runners, what material, where are you placing the throttle body & what dimensions were you using for the plenum? You maybe able to make or have someone fab up a pipe to do the transition you want.

Intake runner length is TBD but is going to be around: .5m
Material: Aluminum
TB placement is perpendicular to runner direction (still working out the finer details)
Plenum is still in the design phase (currently working on ensuring proper distribution of air between all runners)

Consequently after talking with other tuners and fabricators they suggest I use a 75mm TB as 90mm TB is overkill for what I'm planning on.

05-06-2010, 11:31 PM	#1
RotorDad Big Ugly Join Date: Apr 2009 Location: Fredericksburg, Va Posts: 591 Rep Power: 17	How long are you doing the intake runners, what material, where are you placing the throttle body & what dimensions were you using for the plenum? You maybe able to make or have someone fab up a pipe to do the transition you want. __________________ *Boosted Big Body On 335's* PS3 ID: Rotordad 1986 Mazda RX7 GXL - Street ported 13BT, Haltech, 62mm, ect. 2006 MazdaSpeed 6 - Eagle, Wiseco, Cobb, ect.