rx2 sway bar

bwaits · 04-04-2010, 07:51 AM

Many of the "tub" GT cars and E-Prod Rx3s I have seen added stay rods like those used on the first gen suspension. This eliminated the sway bar as a locating member, allowing tubular, aluminum arm style sway bars to be used.

I know the car you have. I would tube from the firewall forward using the frame rails just before the sway bar mounts. Then use "A Arm" lower control arms with custom pick up points. Since it is a drag car nailing the front suspension geometry will be fairly straight forward.

-billy

04-04-2010, 07:51 AM	#6
bwaits Talk - Action = Nothing Join Date: Feb 2008 Posts: 166 Rep Power: 18	Many of the "tub" GT cars and E-Prod Rx3s I have seen added stay rods like those used on the first gen suspension. This eliminated the sway bar as a locating member, allowing tubular, aluminum arm style sway bars to be used. I know the car you have. I would tube from the firewall forward using the frame rails just before the sway bar mounts. Then use "A Arm" lower control arms with custom pick up points. Since it is a drag car nailing the front suspension geometry will be fairly straight forward. -billy __________________