Coilover question?

josh18_2k · 03-19-2010, 04:36 PM

ive heard that you can get custom valved stances, but i dont know anyone thats actually done it. probably dont wanna use their off the shelf valving, as its designed for drifters (too much compression).

if they'll valve to your liking, that would be awesome. i've only heard good things about stance.

AWR's strut tubes have shitty inner clearance. found that out the hard way... they are designed around EP cars with use very low offset 15" wheels. i had to make new brackets and weld them to the tubes to fit my wheels.
if you do use AWR's housings, you can probably call Anthony and have him make the brackets differently. simply copy a stance/tein/jic/whatever lower bracket.

03-19-2010, 04:36 PM	#28
josh18_2k Rotary Fanatic Join Date: Feb 2008 Location: Gresham, OR Posts: 473 Rep Power: 18	ive heard that you can get custom valved stances, but i dont know anyone thats actually done it. probably dont wanna use their off the shelf valving, as its designed for drifters (too much compression). if they'll valve to your liking, that would be awesome. i've only heard good things about stance. AWR's strut tubes have shitty inner clearance. found that out the hard way... they are designed around EP cars with use very low offset 15" wheels. i had to make new brackets and weld them to the tubes to fit my wheels. if you do use AWR's housings, you can probably call Anthony and have him make the brackets differently. simply copy a stance/tein/jic/whatever lower bracket. __________________