speedo help

prican · 01-27-2010, 06:20 PM

i would like to go with electronic speed instead of mechanical for my project all i find is ford and gm pulsating senders does anyone know what part i can use to complete this on my project?

Whizbang · 01-27-2010, 08:09 PM

i need a little more detail as far as what your trying to do. What transmission are you planning on using? Also, are you trying to get the Mazda speedometer to cooperate with an electrical sender?

prican · 01-27-2010, 08:34 PM

i have a suzuki samurai with a 12a and Im getting a custom dash an would like to get all new gauges the set that i found and want to buy come with an electronic speedo.... this is the onlysender unit i keep finding to go with the gauge. will it fit? threads are 7/8 18

Whizbang · 01-27-2010, 09:01 PM

i cant look at the link here at work. But im not too sure how you would adapt from a oem mechanical source. Most of the styles i have seen used for custom applications revolve about a magnetic pickup

prican · 01-27-2010, 11:14 PM

how would this magnetic custom setup works where could i get this set up

Whizbang · 01-27-2010, 11:17 PM

something like this. might have to do some more research into it all though

http://www.summitracing.com/parts/SWW-82646/

prican · 01-28-2010, 12:24 AM

these are the ones i was looking at
http://www.summitracing.com/parts/VDO-340011/
http://www.summitracing.com/parts/CYB-8901/
http://www.summitracing.com/parts/SWW-82527/
and there is a couple more but i dont know if the threads are the same

Whizbang · 01-28-2010, 12:28 AM

im unsure how it would operate in our transmissions being that ours is meant for mechanical drive and those american transmissions listed i have no information on. I dont know if it would adapt or is a replacement for an oem electrical system.

01-27-2010, 06:20 PM	#1
prican Rotary Fan in Training Join Date: Sep 2009 iTrader: (0) Posts: 41 Rep Power: 0	speedo help i would like to go with electronic speed instead of mechanical for my project all i find is ford and gm pulsating senders does anyone know what part i can use to complete this on my project?

01-27-2010, 08:09 PM	#2
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	i need a little more detail as far as what your trying to do. What transmission are you planning on using? Also, are you trying to get the Mazda speedometer to cooperate with an electrical sender? __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

01-27-2010, 08:34 PM	#3
prican Rotary Fan in Training Join Date: Sep 2009 iTrader: (0) Posts: 41 Rep Power: 0	i have a suzuki samurai with a 12a and Im getting a custom dash an would like to get all new gauges the set that i found and want to buy come with an electronic speedo.... this is the onlysender unit i keep finding to go with the gauge. will it fit? threads are 7/8 18 Last edited by prican; 01-27-2010 at 08:50 PM..

01-27-2010, 09:01 PM	#4
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	i cant look at the link here at work. But im not too sure how you would adapt from a oem mechanical source. Most of the styles i have seen used for custom applications revolve about a magnetic pickup __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

01-27-2010, 11:17 PM	#6
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	something like this. might have to do some more research into it all though http://www.summitracing.com/parts/SWW-82646/ __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

01-27-2010, 11:14 PM	#5
prican Rotary Fan in Training Join Date: Sep 2009 iTrader: (0) Posts: 41 Rep Power: 0	how would this magnetic custom setup works where could i get this set up

01-28-2010, 12:24 AM	#7
prican Rotary Fan in Training Join Date: Sep 2009 iTrader: (0) Posts: 41 Rep Power: 0	these are the ones i was looking at http://www.summitracing.com/parts/VDO-340011/ http://www.summitracing.com/parts/CYB-8901/ http://www.summitracing.com/parts/SWW-82527/ and there is a couple more but i dont know if the threads are the same

01-28-2010, 12:28 AM	#8
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp iTrader: (5) Posts: 3,190 Rep Power: 20	im unsure how it would operate in our transmissions being that ours is meant for mechanical drive and those american transmissions listed i have no information on. I dont know if it would adapt or is a replacement for an oem electrical system. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook