TitaniumTT's I hope I make it to DGRR '09 Build - Page 49

need RX7 · 12-19-2009, 02:01 PM

w00t! I'm looking forward to seeing it progress.

WE3RX7 · 12-19-2009, 06:50 PM

I know if anybody will bring the FD back, you will. You should keep those eclipse wheels though, looks good

We are locked down by snow now too - My wife had to leave the rx8 at the inlaws so I picked her up in the mighty TJ... sucks though, apparently the 8 became a good snow drift mule and is now under 36+ inches of snow... should make for a fun tomorrow going to dig her out....

EJayCe996 · 12-19-2009, 08:02 PM

Quote:

Originally Posted by WE3RX7

You should keep those eclipse wheels though

That's exactly what I was about to say, except I don't like them on the FD

KEEP THEM AS DD WHEELS FOR IT ANYWAY

Max777 · 12-20-2009, 04:19 AM

congrads man, I will get an FD too, the next few years for sure, it will be sick.... good luck with the build, looking forward to reading bout it.

BigIslandSevens · 12-20-2009, 08:46 AM

VEry nice pick up man! Judging by it's baja stance I am guessing there is no drivetrain? Are you planning to RE that one as well or use a REW? I understand if you don't want to spill the beans or even know yet. Should be a fun thread for me to get good ides off of

I may wait to go v-mount until you make yours. haha. Anyways, congrats. They are awsome machines. Out of all 3 gens we have, it is the most confidence inspiring to drive.

Dave

2gslse · 12-20-2009, 09:40 AM

Looks like a nice straight body on her good project to start with is it a 93 touring? I see the sunroof and lack of a spoiler but the fogs are gone

***TitaniumTT*** · 12-20-2009, 09:52 AM

Quote:

Originally Posted by need RX7

w00t! I'm looking forward to seeing it progress.

Thanks man

It should be a pretty fast paced build for everything that needs to be done. I'm going to keep track of every penny and every minute spent for a ton of reasons.

Now you have more proof that a Cherokee can haul a car. Although when Tray and I picked it up I was driving an '04 Grand Cherokee Overland

Quote:

Originally Posted by WE3RX7

I know if anybody will bring the FD back, you will. You should keep those eclipse wheels though, looks good

Not a chance! I've got way to many sets of rims. I need to make those dissapear along with my Kosei's. Thanks for the compliment Bill

Quote:

Originally Posted by WE3RX7

We are locked down by snow now too - My wife had to leave the rx8 at the inlaws so I picked her up in the mighty TJ... sucks though, apparently the 8 became a good snow drift mule and is now under 36+ inches of snow... should make for a fun tomorrow going to dig her out....

Damn, we got maybe a foot of that shit. Ruined my plans in Manhattan yesterday and now I'm trying to get a little energy to go dig everything out. Not sure why............. There's nothing moving around here except Jeeps

Quote:

Originally Posted by EJayCe996

That's exactly what I was about to say, except I don't like them on the FD

KEEP THEM AS DD WHEELS FOR IT ANYWAY

Negatory! Hideous! They must go and in a hurry.... in the spring.

***TitaniumTT*** · 12-20-2009, 10:11 AM

Quote:

Originally Posted by Max777

congrads man, I will get an FD too, the next few years for sure, it will be sick.... good luck with the build, looking forward to reading bout it.

Thanks man.

Quote:

Originally Posted by BigIslandSevens

VEry nice pick up man! Judging by it's baja stance I am guessing there is no drivetrain? Are you planning to RE that one as well or use a REW? I understand if you don't want to spill the beans or even know yet. Should be a fun thread for me to get good ides off of

I may wait to go v-mount until you make yours. haha. Anyways, congrats. They are awsome machines. Out of all 3 gens we have, it is the most confidence inspiring to drive.

Dave

You are quite right Dave, there is no drivetrain at all. I'll be going RE and MoTeC but that's about all I'm saying. The turbo's are going to be top secret until I get some numbers

Your comment on the confidence inspiring sounds about right. I love the FC but when she breaks loose, which is often with that power.... it gets a little sketchy. Seems like the FD's suspension should be able to handle more, not to mention you can squeeze bigger tires in the wells, which will be rolled prior to primer

Quote:

Originally Posted by 2gslse

Looks like a nice straight body on her good project to start with is it a 93 touring? I see the sunroof and lack of a spoiler but the fogs are gone

I believe she is a touring. The body is perfect for a build like this. Damn strait, there's a ding in every panel but they are all very minor, no surface rust, the only problem is there were some sleek headlights in stalled at one point and some supports were cut out that need to be buttoned up but that's about it. Alex, trying to convince me to make a race car, was harping on those, then the next day we spent a few hours with a spot weld cutter removing 90% of the front end on the straightest FC we've ever seen

***TitaniumTT*** · 12-20-2009, 10:13 AM

Gonna have to talk to Alex about resizing

2gslse · 12-20-2009, 04:32 PM

How much of the structure was cut up for the sleek lights? do you need another core support to fix it?

Max777 · 12-20-2009, 06:27 PM

I say do some RE-Amemeiya headlights, they look damn sexy!

But that's just me...

***TitaniumTT*** · 12-21-2009, 08:49 AM

Quote:

Originally Posted by 2gslse

How much of the structure was cut up for the sleek lights? do you need another core support to fix it?

The core support is in fantasic shape. Its a few pieces of sheetmetal that were cut out below the core support that run vertical towards the fender liner. Not a huge deal to repair and I may add some extra bracing heading out towards the corner where the fender meets the bumper down low. Thanks for the offer though man, I appreciate it!

Quote:

Originally Posted by Max777

I say do some RE-Amemeiya headlights, they look damn sexy!

But that's just me...

Negative - KnightSport dual headlight kit. I never liked the sleeklights.

helghast7 · 12-21-2009, 04:17 PM

hey you can weld different types of metals right?

2gslse · 12-21-2009, 05:33 PM

Negative - KnightSport dual headlight kit. I never liked the sleeklights.[/QUOTE]

I love the way the knightsports look but if I remember right they require the headlight lid retainer (clips) to be cut off and use doublesided tape or something to hold it down. They are plastic and have a bad enough time staying on as it is without cutting mounts off.
there was a group buy for some bi-xenon projectors (from sakebomb garage) in the popups for good lighting without the bad looks of the sleek lights.

WE3RX7 · 12-21-2009, 05:57 PM

Such a hater on flush headlights

Guess that means I cant con you into making the bracket for my HIDs huh?

You should make a new thread for your FD, even if you dont start building it until the spring - I have a sneaking suspicion you will tinker here and there before then

12-19-2009, 02:01 PM	#721
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI Posts: 485 Rep Power: 18	w00t! I'm looking forward to seeing it progress. __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress.

12-20-2009, 04:19 AM	#724
Max777 Pirate Join Date: Mar 2008 Location: Central IL Posts: 1,323 Rep Power: 19	congrads man, I will get an FD too, the next few years for sure, it will be sick.... good luck with the build, looking forward to reading bout it. __________________ Rotaries:They are NOT that complicated!

12-20-2009, 08:46 AM	#725
BigIslandSevens Rotary Fanatic Join Date: Feb 2008 Location: Denver, NC Posts: 201 Rep Power: 18	VEry nice pick up man! Judging by it's baja stance I am guessing there is no drivetrain? Are you planning to RE that one as well or use a REW? I understand if you don't want to spill the beans or even know yet. Should be a fun thread for me to get good ides off of I may wait to go v-mount until you make yours. haha. Anyways, congrats. They are awsome machines. Out of all 3 gens we have, it is the most confidence inspiring to drive. Dave Last edited by BigIslandSevens; 12-20-2009 at 08:55 AM.

12-20-2009, 10:13 AM	#729
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Gonna have to talk to Alex about resizing __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

12-20-2009, 06:27 PM	#731
Max777 Pirate Join Date: Mar 2008 Location: Central IL Posts: 1,323 Rep Power: 19	I say do some RE-Amemeiya headlights, they look damn sexy! But that's just me... __________________ Rotaries:They are NOT that complicated!

12-19-2009, 06:50 PM	#722
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	I know if anybody will bring the FD back, you will. You should keep those eclipse wheels though, looks good We are locked down by snow now too - My wife had to leave the rx8 at the inlaws so I picked her up in the mighty TJ... sucks though, apparently the 8 became a good snow drift mule and is now under 36+ inches of snow... should make for a fun tomorrow going to dig her out....

12-20-2009, 09:40 AM	#726
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va Posts: 440 Rep Power: 18	Looks like a nice straight body on her good project to start with is it a 93 touring? I see the sunroof and lack of a spoiler but the fogs are gone

12-20-2009, 04:32 PM	#730
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va Posts: 440 Rep Power: 18	How much of the structure was cut up for the sleek lights? do you need another core support to fix it?

12-21-2009, 04:17 PM	#733
helghast7 F yo couch! Join Date: Dec 2009 Location: Belleville, NJ Posts: 223 Rep Power: 16	hey you can weld different types of metals right?

12-21-2009, 05:33 PM	#734
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va Posts: 440 Rep Power: 18	Negative - KnightSport dual headlight kit. I never liked the sleeklights.[/QUOTE] I love the way the knightsports look but if I remember right they require the headlight lid retainer (clips) to be cut off and use doublesided tape or something to hold it down. They are plastic and have a bad enough time staying on as it is without cutting mounts off. there was a group buy for some bi-xenon projectors (from sakebomb garage) in the popups for good lighting without the bad looks of the sleek lights.

12-21-2009, 05:57 PM	#735
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	Such a hater on flush headlights Guess that means I cant con you into making the bracket for my HIDs huh? You should make a new thread for your FD, even if you dont start building it until the spring - I have a sneaking suspicion you will tinker here and there before then