Who says you can't have an emmisions LEGAL 400+RWHP rotary? - Page 2

Turbo II Rotor · 11-28-2009, 04:03 PM

http://www.summitracing.com/search/B...fuel+additives

NoDOHC · 11-30-2009, 11:18 PM

Quote:

Originally Posted by Max777

However, what can one do to make their RX smell better? Would a cat alone make sense, or would that be a waste of money?

Quote:

Originally Posted by djmtsu

Nuthin you can do to make a rotary smell better.

You can however keep a travel bottle of cologne in the car. Thats what I do. The wife loves the smell of CK and high octane.

Seriously, Rotaries only smell bad with the stock ECU. I have no cat on my '86 and it will idle smoothly at 14.5:1 and run elsewhere about 15.0:1 and there is no odor at all except if you floor it (then it smells like oil smoke from too much injection due to a modified OMP linkage).

My '91 has a cat and still smells bad.

Congrats on the pass Brian!

-Six- · 12-08-2009, 04:20 PM

Sucks that you even have to go through all that with such an old car. We don't even need to bother testing them in Illinois, emissions exempt.

***TitaniumTT*** · 12-08-2009, 07:03 PM

Quote:

Originally Posted by NoDOHC

Seriously, Rotaries only smell bad with the stock ECU. I have no cat on my '86 and it will idle smoothly at 14.5:1 and run elsewhere about 15.0:1 and there is no odor at all except if you floor it (then it smells like oil smoke from too much injection due to a modified OMP linkage).

My '91 has a cat and still smells bad.

Congrats on the pass Brian!

Thanks man!

What is your timing and kpa like to run so lean?

NoDOHC · 12-13-2009, 11:14 PM

Timing is stock (5 degrees ATDC L, 20 degrees ATDC T)
It runs about 50 kPA of vacuum with the timing retarded that much.

I can't go much lean of 13:1 without retarding the timing a lot (it actually uses less fuel to idle with 10 degrees BTDC timing though, because it is running 70-75 kPA of vacuum).

I couldn't really get the idle smooth without retarding the timing, it idles like a weedwacker with normal timing numbers.

Actually, I use the pit in my timing map to stabilize the idle. The timing increases gradually below 1000 rpm and above 1500 rpm, this means that the engine gains power as the revs drop below idle (when engaging the clutch), giving a little bit of stability (improves driveability).

I wish I could idle closed loop, but I still haven't gotten that to work smoothly (probably need more timing retard).

***TitaniumTT*** · 12-14-2009, 10:35 PM

Interesting. Thanks for that. I'm sure I'll be playing around with the idle again in the spring with the new injectors and the coils.

12-13-2009, 11:14 PM	#20
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin Posts: 855 Rep Power: 17	Timing is stock (5 degrees ATDC L, 20 degrees ATDC T) It runs about 50 kPA of vacuum with the timing retarded that much. I can't go much lean of 13:1 without retarding the timing a lot (it actually uses less fuel to idle with 10 degrees BTDC timing though, because it is running 70-75 kPA of vacuum). I couldn't really get the idle smooth without retarding the timing, it idles like a weedwacker with normal timing numbers. Actually, I use the pit in my timing map to stabilize the idle. The timing increases gradually below 1000 rpm and above 1500 rpm, this means that the engine gains power as the revs drop below idle (when engaging the clutch), giving a little bit of stability (improves driveability). I wish I could idle closed loop, but I still haven't gotten that to work smoothly (probably need more timing retard). __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)

12-14-2009, 10:35 PM	#21
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Interesting. Thanks for that. I'm sure I'll be playing around with the idle again in the spring with the new injectors and the coils. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

11-28-2009, 04:03 PM	#16
Turbo II Rotor Rotary Fan in Training Join Date: Nov 2008 Location: Aurora, CO Posts: 59 Rep Power: 17	http://www.summitracing.com/search/B...fuel+additives

12-08-2009, 04:20 PM	#18
-Six- Rotary Fan in Training Join Date: Dec 2009 Posts: 41 Rep Power: 0	Sucks that you even have to go through all that with such an old car. We don't even need to bother testing them in Illinois, emissions exempt.