GB: Bi-xenon HID PROJECTOR - SakeBomb Garage

[Mobius]

This looks pretty decent! I have a few questions though,

Do you have any pictures of the retrofit? Is the the projector fitted into a stock reflector housing, usable with the stock shroud ect?

What projectors are used with this kit?

Do you have pictures of the cut off against a wall? Has the cut off been modified in any way, for sharpness or flicker?

How were the ballasts weatherproofed? Silicone dipped or thermally conductive epoxy inside?

Is there any rotational adjustment for the projectors to level/line the cut off up?

Shipping to Canada?

Thanks

[3RotorMotor]

Originally Posted by Mobius

This looks pretty decent! I have a few questions though,

Do you have any pictures of the retrofit? Is the the projector fitted into a stock reflector housing, usable with the stock shroud ect?

What projectors are used with this kit?

Do you have pictures of the cut off against a wall? Has the cut off been modified in any way, for sharpness or flicker?

How were the ballasts weatherproofed? Silicone dipped or thermally conductive epoxy inside?

Is there any rotational adjustment for the projectors to level/line the cut off up?

Shipping to Canada?

Thanks

Hey, Thanks for your interest. We had everything in slideshows but unfortunately RCC wont accept HTML code so we cant display the slide shows we have of all of the parts. I'll post pics and video of everything but all of the explanations that normally go along with our pictures wont be there.

Shipping to Canada is not a problem and we can get a price quote for you if you are interested. The projectors we use are FX projectors with optically clear lenses. The cutoff is very sharp and does have blue/purple flicker at the top of the cutoff. The ballasts are weather-sealed (i believe a silicone gasket... though I havent taken them apart). Yes the lights can be adjusted up/down and L/R just like stock using the stock adjustment screws I'll post pics, video, and sideshows below. -Heath

[Mobius]

Originally Posted by 3RotorMotor

The projectors we use are FX projectors with optically clear lenses. The cutoff is very sharp and does have blue/purple flicker at the top of the cutoff. The ballasts are weather-sealed (i believe a silicone gasket... though I havent taken them apart). Yes the lights can be adjusted up/down and L/R just like stock using the stock adjustment screws I'll post pics, video, and sideshows below. -Heath

Awesome. Count me in, just let me know what the shipping cost would be and where to send the money! I imagine you'll do paypal?

[3RotorMotor]

Originally Posted by Mobius

Awesome. Count me in, just let me know what the shipping cost would be and where to send the money! I imagine you'll do paypal?

1. Mobius (Shipping to Canada USPS priority $33)
2.
3.
4.


PAYMENTS:

Paypal - sakebombgarage@gmail.com

e-check payment is preferred as we are not charged the 3% paypal fee for the transaction, and therefore don't pass any extra cost on to the customer (either up front in the price or afterwards in the payment process). **Please add 3% to the total if using STANDARD paypal.** We decided that it would be better to NOT build in this 3% into to the cost up front, but give customers the option to save the money. Unfortunately it adds some confusion to the payment process. (Please contact me if you choose to pay using e-check, and need any assistance using it. Basically paypal's e-check function is free because it withdraws money from your bank account instead of credit card... I guess paypal likes that method better and therefore does not charge for it) -Heath

[Mobius]

Originally Posted by 3RotorMotor

1. Mobius (Shipping to Canada USPS priority $33)/Standard Ballast - Payment Sent
2.
3.
4.

.