Simplified Sequential Vacuum Hoses

ObliqueFD · 03-07-2008, 11:44 PM

I have blocked off my EGR and Double Throttle and in the future will be removing my airpump and ACV. That leaves me left over with unnecessary solenoids and hoses to remove for the simplified sequential setup. I was told I need 30' of 3.5mm but I think that would be to do the whole system. How much do I really need? I suppose it wouldn't hurt to order extra.

cewrx7r1 · 03-08-2008, 01:21 PM

If you do this with the stock ecu, do not forget to put LOAD resistors on the connectors
where you remove any solenoids.

David Jerome · 03-08-2008, 03:17 PM

Quote:

Originally Posted by cewrx7r1

If you do this with the stock ecu, do not forget to put LOAD resistors on the connectors
where you remove any solenoids.

You only need them for the solonoids on the actual metal "rats nest". You dont need them for turbo control and precontrol.

03-07-2008, 11:44 PM	#1
ObliqueFD Rotary Fan in Training Join Date: Feb 2008 Location: Lancaster, Ohio iTrader: (0) Posts: 53 Rep Power: 17	Simplified Sequential Vacuum Hoses I have blocked off my EGR and Double Throttle and in the future will be removing my airpump and ACV. That leaves me left over with unnecessary solenoids and hoses to remove for the simplified sequential setup. I was told I need 30' of 3.5mm but I think that would be to do the whole system. How much do I really need? I suppose it wouldn't hurt to order extra.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-08-2008, 01:21 PM	#2
cewrx7r1 The Judge Join Date: Feb 2008 iTrader: (0) Posts: 196 Rep Power: 17	If you do this with the stock ecu, do not forget to put LOAD resistors on the connectors where you remove any solenoids.