Rotary Car Club - Simplified Sequential Vacuum Hoses

Rotary Car Club (https://rotarycarclub.com/index.php)

- RX-7 3rd Gen Specific (1993-2002) (https://rotarycarclub.com/forumdisplay.php?f=36)

- - Simplified Sequential Vacuum Hoses (https://rotarycarclub.com/showthread.php?t=766)

ObliqueFD

03-07-2008 11:44 PM

Simplified Sequential Vacuum Hoses

I have blocked off my EGR and Double Throttle and in the future will be removing my airpump and ACV. That leaves me left over with unnecessary solenoids and hoses to remove for the simplified sequential setup. I was told I need 30' of 3.5mm but I think that would be to do the whole system. How much do I really need? I suppose it wouldn't hurt to order extra.

cewrx7r1

03-08-2008 01:21 PM

If you do this with the stock ecu, do not forget to put LOAD resistors on the connectors
where you remove any solenoids.

David Jerome

03-08-2008 03:17 PM

Quote:

Originally Posted by cewrx7r1 (Post 5569)

If you do this with the stock ecu, do not forget to put LOAD resistors on the connectors
where you remove any solenoids.

You only need them for the solonoids on the actual metal "rats nest". You dont need them for turbo control and precontrol.

All times are GMT -5. The time now is 08:21 AM.