Do the Secondary Injectors Operate on Startup?

Mobius · 06-12-2008, 09:20 PM

As stated above, do the secondary injectors operate while cranking the car? I haven't been able to find a concise yes or no anywhere.

Thank you.

tom93r1 · 06-13-2008, 02:41 AM

You could disconnect them a drive around never know they were disabled until you started getting into boost

0110-M-P · 06-13-2008, 07:23 AM

Quote:

Originally Posted by tom93r1

You could disconnect them a drive around never know they were disabled until you started getting into boost

This sounds like a disaster waiting to happen. I definitely would not try this.

Mobius · 06-13-2008, 08:11 AM

So that would be an absolutely not?

SPICcnmFD · 06-13-2008, 09:05 AM

Correct

tom93r1 · 06-13-2008, 02:58 PM

Quote:

Originally Posted by 0110-M-P

This sounds like a disaster waiting to happen. I definitely would not try this.

Yeah, I wouldnt recommend trying it. Just if you did happen to try it, keep the throttle low so the secondaries dont come on.

Mobius · 06-13-2008, 05:22 PM

They aren't used for cold start or anything like that?

David Jerome · 06-13-2008, 05:30 PM

Not used on cold startup, however this doesnt mean you dont have a leaky injector causing issues on startup or at idle.

Mobius · 06-13-2008, 07:24 PM

Quote:

Originally Posted by David Jerome

Not used on cold startup, however this doesnt mean you dont have a leaky injector causing issues on startup or at idle.

Thank you. They are brand new injectors, and they have been leak tested. (albeit 1680cc which is why I figured that if they were used, I may have to change the startup fuel settings). I'm just trying to eliminate them as possible suspects to my starting/running issues.

David Jerome · 06-15-2008, 10:06 AM

Quote:

Originally Posted by Mobius

Thank you. They are brand new injectors, and they have been leak tested. (albeit 1680cc which is why I figured that if they were used, I may have to change the startup fuel settings). I'm just trying to eliminate them as possible suspects to my starting/running issues.

You can always pinch an oring during install, I have installed hundreds of injectors and I recently did this on one of my cars. I also had a freshly cleaned and flow tested injector leak out the top immediately after install recently. You will get it sorted out.

06-12-2008, 09:20 PM	#1
Mobius Rotorhead Join Date: May 2008 Location: Drumheller, Alberta iTrader: (1) Posts: 164 Rep Power: 17	Do the Secondary Injectors Operate on Startup? As stated above, do the secondary injectors operate while cranking the car? I haven't been able to find a concise yes or no anywhere. Thank you. __________________ \|\|\| Never argue with idiots. They will bring you down to their level and beat you with experience. \|\|\|

06-13-2008, 08:11 AM	#4
Mobius Rotorhead Join Date: May 2008 Location: Drumheller, Alberta iTrader: (1) Posts: 164 Rep Power: 17	So that would be an absolutely not? __________________ \|\|\| Never argue with idiots. They will bring you down to their level and beat you with experience. \|\|\|

06-13-2008, 09:05 AM	#5
SPICcnmFD Rotary Fanatic Join Date: Feb 2008 Location: B'ham, AL iTrader: (0) Posts: 329 Rep Power: 17	Correct __________________ 1993 Rx-7 SM2 #11 At the local AutoX: http://www.youtube.com/watch?v=9VOSQkkSLQs Speed for Sale shootout 2007: http://www.youtube.com/watch?v=JiqlyAkGmpg A few laps at Barbers: http://www.youtube.com/watch?v=6_h5q...x=0&playnext=1

06-13-2008, 05:22 PM	#7
Mobius Rotorhead Join Date: May 2008 Location: Drumheller, Alberta iTrader: (1) Posts: 164 Rep Power: 17	They aren't used for cold start or anything like that? __________________ \|\|\| Never argue with idiots. They will bring you down to their level and beat you with experience. \|\|\|

06-13-2008, 05:30 PM	#8
David Jerome RCC Contributor Join Date: Jan 2008 iTrader: (10) Posts: 713 Rep Power: 17	Not used on cold startup, however this doesnt mean you dont have a leaky injector causing issues on startup or at idle. __________________ David Jerome Broker for Speed For Sale LLC (David@SpeedForSale.com) (Pre-owned RX7/sports car sales & new parts sales/installs/tuning) PM me about low priced, high quality port work

06-13-2008, 02:41 AM	#2
tom93r1 Rotary Fan in Training Join Date: Feb 2008 iTrader: (0) Posts: 45 Rep Power: 0	You could disconnect them a drive around never know they were disabled until you started getting into boost

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode