New From Tennessee

skfury · 08-11-2012, 01:59 AM

Hello everyone. My name is Matt. I drive a 1990 RX7 GTU. Its a project/daily at the moment. Im planning a full T2 drivetrain swap with powered by max coilovers by the end of winter. This is my second RX7. My first one was stolen (10 AE model) and after a few years I finally found another one for a good price that just needed a bit of work. My current S5 has a rebuilt motor and trans with a stage 2 clutch and a racing beat cat back exhaust with a test pipe running from the header to the cat back. Ive only done small mods so far such as a miata short shifter and an hks intake. Here are a few pictures.She isnt pretty at the moment but when I get the wide rears and paint on it should look alot better.

speedjunkie · 08-11-2012, 02:34 AM

Welcome!

FC Zach · 08-11-2012, 06:45 AM

Welcome!

rx7 vinnie · 08-11-2012, 07:23 AM

Welcome to the darkside.......... Faggot.

skfury · 08-11-2012, 11:43 PM

Hey Vinnie I assumed you would post here. I've got an exciting meeting with a machine shop on Monday that involves 4 housings.

rx7 vinnie · 08-12-2012, 12:30 AM

Do tell.... Machine shops round here I've dropped off to clean first words out of their mouths were.... WTF IZ THAT THUR?!?!? I just chuckle.

skfury · 08-12-2012, 12:58 AM

Im going on monday to check on the price to build a 4 rotor eccentric. Apparently he builds custom cranks on the cheap so Im going to see pricing and then potentially do something really stupid with alot of money

rx7 vinnie · 08-12-2012, 08:03 AM

Wowzers.... LMK the details on it..... Would love to have one.

skfury · 08-12-2012, 11:08 PM

Ill let you know his pricing as soon as I find out. I may need to hit you up for a rebuild soon. My OMP just stopped working and I feel like Ive lost power so Im going for a comp test this week as well

reddozen · 08-14-2012, 11:28 AM

If I had to guess, I'd say close to $5k, but that all depends on the setup, and since it's a 1 off billet, it could be as much as $10k. Most CAD quotes I've gotten alone for manufacturing / engineering are in the $3000~$5000 range, and that's just for a cast rotor. I had them spec out my 3rotor shaft and it's about the same general cost, but cheaper to actually cast at around $200 a slug.

GL, I'll be curious to see what they quote you...

08-11-2012, 01:59 AM	#1
skfury The Newbie Join Date: Jul 2012 Posts: 5 Rep Power: 0	New From Tennessee Hello everyone. My name is Matt. I drive a 1990 RX7 GTU. Its a project/daily at the moment. Im planning a full T2 drivetrain swap with powered by max coilovers by the end of winter. This is my second RX7. My first one was stolen (10 AE model) and after a few years I finally found another one for a good price that just needed a bit of work. My current S5 has a rebuilt motor and trans with a stage 2 clutch and a racing beat cat back exhaust with a test pipe running from the header to the cat back. Ive only done small mods so far such as a miata short shifter and an hks intake. Here are a few pictures.She isnt pretty at the moment but when I get the wide rears and paint on it should look alot better.

08-11-2012, 06:45 AM	#3
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN Posts: 2,267 Rep Power: 20	Welcome! __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

08-11-2012, 07:23 AM	#4
rx7 vinnie I SEE DEAD PEOPLE Join Date: Mar 2008 Location: nashville, tn (antioch) Posts: 743 Rep Power: 18	Welcome to the darkside.......... Faggot. __________________ VIN-AUTO Rotary list of Fails below: 86 mazda rx7 csp 61 N/A= because RACECAR 87 mazda rx7 t2 with 13b-re cosmo GT42= FKN RUNS!!! 03 Dodge Viper SRT-10 Vert 06 dodge ram 2500 Megacab turbo Cummins=puller 16 MB ML350

08-12-2012, 12:30 AM	#6
rx7 vinnie I SEE DEAD PEOPLE Join Date: Mar 2008 Location: nashville, tn (antioch) Posts: 743 Rep Power: 18	Do tell.... Machine shops round here I've dropped off to clean first words out of their mouths were.... WTF IZ THAT THUR?!?!? I just chuckle. __________________ VIN-AUTO Rotary list of Fails below: 86 mazda rx7 csp 61 N/A= because RACECAR 87 mazda rx7 t2 with 13b-re cosmo GT42= FKN RUNS!!! 03 Dodge Viper SRT-10 Vert 06 dodge ram 2500 Megacab turbo Cummins=puller 16 MB ML350

08-12-2012, 08:03 AM	#8
rx7 vinnie I SEE DEAD PEOPLE Join Date: Mar 2008 Location: nashville, tn (antioch) Posts: 743 Rep Power: 18	Wowzers.... LMK the details on it..... Would love to have one. __________________ VIN-AUTO Rotary list of Fails below: 86 mazda rx7 csp 61 N/A= because RACECAR 87 mazda rx7 t2 with 13b-re cosmo GT42= FKN RUNS!!! 03 Dodge Viper SRT-10 Vert 06 dodge ram 2500 Megacab turbo Cummins=puller 16 MB ML350

08-11-2012, 02:34 AM	#2
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Welcome!

08-11-2012, 11:43 PM	#5
skfury The Newbie Join Date: Jul 2012 Posts: 5 Rep Power: 0	Hey Vinnie I assumed you would post here. I've got an exciting meeting with a machine shop on Monday that involves 4 housings.

08-12-2012, 12:58 AM	#7
skfury The Newbie Join Date: Jul 2012 Posts: 5 Rep Power: 0	Im going on monday to check on the price to build a 4 rotor eccentric. Apparently he builds custom cranks on the cheap so Im going to see pricing and then potentially do something really stupid with alot of money

08-12-2012, 11:08 PM	#9
skfury The Newbie Join Date: Jul 2012 Posts: 5 Rep Power: 0	Ill let you know his pricing as soon as I find out. I may need to hit you up for a rebuild soon. My OMP just stopped working and I feel like Ive lost power so Im going for a comp test this week as well

08-14-2012, 11:28 AM	#10
reddozen Gold Wheels FTW Join Date: Mar 2008 Posts: 744 Rep Power: 18	If I had to guess, I'd say close to $5k, but that all depends on the setup, and since it's a 1 off billet, it could be as much as $10k. Most CAD quotes I've gotten alone for manufacturing / engineering are in the $3000~$5000 range, and that's just for a cast rotor. I had them spec out my 3rotor shaft and it's about the same general cost, but cheaper to actually cast at around $200 a slug. GL, I'll be curious to see what they quote you... __________________ My Cars: 1974 RX4 Coupe 1991 FC3S RX7 - Sold 2003 ZZW30 MR2 (Rotary swap after RX8) 2004 SE3P RX8 (20B Swap in the works)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode