Rice Racing M&W CDI COP Set-up

[RICE RACING]

mung it

[TitaniumTT]

Originally Posted by RICE RACING

It is see pic

The fasteners are
M6x1 engine bracket

I see... I'm just an idiot....

Originally Posted by RICE RACING

M5x0.8 coil spacers x 2
M8x1 OR 1/4 inch (have not decided yet) x 4 for the coils.

It would be my preference to see an M8 there, however IIRC the bosses need to be honed for that to work.

Originally Posted by RICE RACING

This is a fabricated version of V3, I call this V4, cost should be much lower (well for the frame part anyway)! and I can offer the drawings (nominal fee) to people who are handy with a welder and a hammer! so they can make their own without guess work? just an idea.

The geometry and spacing is refined here in this version, for an expensive option on this will be a CNC smooth gag factor engine mount and coil spacers similar to the last pictures of V3 but I wont do this for a week or so as I am at CAD overload stage and

Looks awesome Peter... really really awesome...

Have you contacted any of the vendors stateside to see if they have an interest in distributing? I was going to do this with the MAP sensor mounts.... IF I EVER GET THEM :beatdeadhorse:

Originally Posted by RICE RACING

want to punch the screen with much intensity!

Originally Posted by RICE RACING

Too much other tuning and engine work to do so will be back on this in a week or so and let you know updates, hope there is enough info here for people to see wtf they want and we will go from there!

PG

I'm down, Levi seems down (And no, it won't delay the start of the LR instal