|
|||||||
| RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections. |
 |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections. |
|
|
|
Thread Tools | Display Modes |
|
|
10-08-2012, 11:23 AM
|
#1 |
|
Driving The Rotary Sports
Join Date: May 2012
Location: California
Posts: 112
Rep Power: 14  |
We use banjo fittings on our oil cooler kit, but for cars with front mounts we recommend a forged 90 degree female/female fitting... It brings the thermostat back slightly for more clearance. We were also concerned with the weight of the thermostat and lines causing the fittings to come loose over time, so we made a mount/brace to hold the thermostat up and take the load off the fitting. You could consider doing something similar.
-Dan
__________________
Follow us for product updates and more! |
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
