|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
|
Thread Tools | Display Modes |
10-24-2009, 07:27 PM
|
#10 |
|
Rotary Fanatic
Join Date: Feb 2008
Posts: 192
Rep Power: 18  |
Purchased the sleeve inserts from Pineapple.
I installed them using the pineapple instructions; red loctite and dempeling... But because I read some horror stories about them sliding back and forth, I decided to lock them in place with a set screw. The pictures show the inserts in place and on the closed side of the port, you can see the set screws I added. One new concern in this entire deal is that the sleeves are now almost twice their original weight. Hopefully the actuators will not have trouble with the added weight/drag.
__________________
...shoot a mother-humpin moose, eight days of the week... Last edited by BLKTOPTRVL; 10-24-2009 at 07:38 PM. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode