Edelbrock 600 (1406) & 6p 13B

Rogue_Wulff · 11-20-2008, 01:45 PM

Sounds plausable. If the rods are not getting pulled down quickly enough, excess fuel will drip into the venturi. I'd also check to insure the rod plungers move freely. I had a problem with one that didn't, and it dribbled fuel constantly into one venturi.
As for not returning to idle quickly enough, that could be from a vacuum leak, or weak return spring/binding linkage.

11-20-2008, 01:45 PM	#31
Rogue_Wulff Non Member Join Date: Jun 2008 Posts: 310 Rep Power: 18	Sounds plausable. If the rods are not getting pulled down quickly enough, excess fuel will drip into the venturi. I'd also check to insure the rod plungers move freely. I had a problem with one that didn't, and it dribbled fuel constantly into one venturi. As for not returning to idle quickly enough, that could be from a vacuum leak, or weak return spring/binding linkage.