Go Back   Rotary Car Club > Vendors and Group Buys > All Vendors > BNR Turbos

BNR Turbos www.bnrturbos.com (AL) Custom and rebuilt turbochargers

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-30-2008, 05:30 AM   #11
Boostmaniac
Rotary Fanatic
 
Join Date: Apr 2008
Posts: 182
Rep Power: 0
Boostmaniac is on a distinguished road
Quote:
Originally Posted by Bryan@BNR View Post
A stock ECU will work good. You will need to pull around 6 degrees out of the timing and then get some 720s with a Super AFC 2 along with a FCD. Then with all the other mods, you should be good for 12-13 psi of boost. I would definatly install an EGT gauge to monitor those exhaust temps, then you will see how much room you have to adjust your timing up or down with the crank angle sensor. Also just as crutial is your AFR's. Make damn sure to keep the engine running pig rich and don't run more than 11.4 AFR at full boost. You may be able to run more boost, but definately keep an eye on that tuning b/c you can ruin the engine in a second if you dont know what you are doing...
There was more factual wisdom in this paragraph than you will ever know. I think all TII owners should memorize this before modifying their cars.
Boostmaniac is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:18 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com