pre mix

[RETed]

I was using Valvoline Multi-Use exclusively, until it started to climb over $6 / quart.
We've used Castro too with good results.
As long as it has the TC-W3 rating, it's good to go.
Yeah, the viscosity is a little different between the brands, but our teardowns show good wear.
We've run race motors (NA) with mostly Valvoline Multi-Use upping the ratio to 50:1 - 75:1 with good teardowns.

I normally just add half a quart (16 oz.) to a fill-up - 1987 Turbo II - which normally comes out to about 12 - 13 gallons, and the ratio comes out to right about 100:1.
For S5's with the bigger fuel tanks, if you do this, the ratio comes to just about 120:1 - 130:1.


-Ted