|
RX-8 Cars For Sale Buy or Sell your Car only!! No Parts! |
Welcome to Rotary Car Club. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
|
Thread Tools | Display Modes |
01-13-2012, 02:23 PM | #1 |
Rotary Fanatic
|
FS: 2004 RX8 with new engine
I'm selling a 2004 Brilliant Black Mazda RX8. 6 Speed manual. The car was purchased by me at around 150K miles and a low compression engine. Since that time, a Mazda reman was purchased, torn down, all clearances checked and light cleaning of the ports was performed before the engine was restacked and put in the car. The car has about 170K miles on it now and the engine is fully broken in. The car is equipped with the following parts:
- Reman Mazda engine with roughly 20k miles (rebuilt only to verify side seal clearances and to clean the ports up a bit) - GReddy 32-way coilovers - New Clutch and Mazdaspeed flywheel and counterweight - Racing Beat headers - Custom full Magnaflow exhaust from the headers back to include a Magnaflow hi-flo cat and muffler. Great sound and not over the top loud. - 19" wheels with new Cooper rubber (less than 20k miles on the tires) - AutoEXE fiberglass hood (this hood is over $1,000 to buy new) - Tinted windows all around (including slight tint on front windshield). - Sohn OMP adapter kit with custom oil resevoir (this allows the use of fresh oil from a secondary source instead of spending used engine oil in the OMP) - New aluminum radiator This setup made 194RWHP after engine break-in. The car has just been an extra vehicle around the house and a simple project, but my attention has turned to other projects at this time. The only known issues at this is the front speakers are not working and it did have an issue with the electric power steering sensor, but after cleaning the contacts it has been fine for several weeks without a hiccup. Must drive to appreciate. I'm asking $8,500obo. The aftermarket equipment on this car alone is worth about $6,000. That doesn't include the reman engine core and rebuild! This car has at least $10k invested. It's just time to move on to other projects. I have owned and built countless rotary powered cars in the past, so don't hesitate to ask specifics about this car. These are some photos (sorry for the black/white on most, I'll get some new ones if needed). I also have the original OEM hood, stock wheels/tires and an unmarried Access Port tuner available with the car as well. Feel free to ask questions and make offers! If you ask around, there are some forum members who've seen the car in person and know the quality of the work performed. This would be a great weekend warrior, auto-x or TT car.
__________________
____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"... |