|
|||||||
| Rotary Tech - General Rotary Engine related tech section.. Tech section for general Rotary Engine... This includes, building 12As, 13Bs, 20Bs, Renesis, etc... |
|
|
Thread Tools | Display Modes |
|
|
#11 |
|
Don Mega
Join Date: Dec 2008
Location: Utopia
Posts: 1,688
Rep Power: 18 ![]() |
The ignition is the single most important aspect in a high powered car, it makes the difference between you telling the motor what to do V's it dictating to you how and when and what it wants to run, I simply copied this basic fact from the old WW2 boys who were using magneto and huge current and energy ignitions to run massive water to fuel ratio's, once I figured out that key element/restriction of normal ways of thinking today a whole new world in terms of power and reliability were open to me.
Here is a picture of the CDI & COP systems current and burn time as measured on my pecoscope, it is very powerful ! ![]() This is picoscope testing of my CDI system, for current flow, primary voltage, secondary burn time, number of spark restrikes.... works well even a newb with electricity like me can figure it out Burn time is roughly 420us or .4 milliseconds and there is 6 separate restrikes at 1000rpm over roughly 5 milliseconds per cycle. System pulls about 25 amps of first spark and 13 amps for the restrike sparks.
__________________
www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration |
|
|
|
| Bookmarks |
|
|