Constructing your own Intake Manifold

vex · 05-12-2010, 10:06 AM

ROar! My flow distribution goes to complete crap! Intake inlet velocity is an assumed 47000 mm/s with a total pressure of 24.7psi. (Patm+10psi) This is going to be a lot more trouble some than I thought.

**Flow distribution is important because if you don't have the proper flow distribution you can starve a rotor, while leaning out the other. Which appears to be the case with what I have so far.

05-12-2010, 10:06 AM	#5
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 20	ROar! My flow distribution goes to complete crap! Intake inlet velocity is an assumed 47000 mm/s with a total pressure of 24.7psi. (Patm+10psi) This is going to be a lot more trouble some than I thought. **Flow distribution is important because if you don't have the proper flow distribution you can starve a rotor, while leaning out the other. Which appears to be the case with what I have so far. __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group