It's a three-fer! Two FC's and an FD! With some 3-rotor madness - Page 2

Max777 · 11-22-2009, 02:52 PM

"Just" a driver? That counts as far as I'm concerned!

Rotary no Densetsu · 11-23-2009, 01:10 PM

f**k yeah, rainy drift days. Smashed a wall, backed out of it. Finished the course.

Had to pull it back into the pits to check damage and then I went right back out. lmfao I had a blast yesterday. Driftin' at Lowes Motor Speedway. wooooo

Gonna 99 spec everything anyway, so it's allllll good. Of course I won't be drifting the car after that 'cause hopefully my two other drift cars will be finished by the time I actually get this car painted.

Rotary no Densetsu · 01-11-2010, 10:58 PM

Shit.

Bought another FC today. Gonna throw my old 13bT out of the 20b project car into it. It was a pretty decent streetport motor that still runs.

Gonna turn that bitch into a pick-up truck drift car.

SouthSideSlider · 01-12-2010, 01:56 AM

hey buddy. hehehe

Rotary no Densetsu · 02-21-2010, 11:36 PM

Got a few new photos of the black FD from Saturday! Nothin' special. About to be a lot photos and updates on the 3-rotor drift car soon!

Rotary no Densetsu · 07-23-2010, 11:17 AM

Whoa.

I have no updated this thinger in a hot minute. It's all good. 'Cause I have not had a ton done. Been busy with running my business and all that crap. So, I have a deadline on the car, it absolutely 1,000,000% needs to be complete and good to go by the time PRI comes around.

We have a drift event that week down in Florida, so, we're wanting to knock out two birds with one stone, show it off at our PRI booth along with some other really cool things completely unrelated to rotary, and then test the car out on the track FINALLY. I'm dying to drive this thing right now. Though, I'm going out to Japan this weekend, I won't get a ton of shit done on it. Hopefully my wheels will get here before I get back that way some suspension crap can get done before I get back on the 11th.

I also bought a Lexus, not that anyone probably cares. rofl. It has one of them fancy pants 2jz things. Planning slappin' a turbo on that thing and making like 500whp. Yeeeeeh.

Oh my, once I start I can't stop ranting. Anyway, here's a couple pictures of some random crap.

More updates in the coming months. Knowing me though, I won't update until the car is done. rofl

classicauto · 07-23-2010, 12:46 PM

Quote:

Originally Posted by Rotary no Densetsu

I like where this is headed. Tial backside on the turbo?

Rotary no Densetsu · 07-23-2010, 12:50 PM

Yessir! I thiiiiiiink I posted a picture of it in an earlier post. Wow I really need to become more active on here.

Rotary no Densetsu · 09-20-2010, 09:50 AM

This car does not exist, it's a unicorn.

We tweeked the fuck out of the dash and are currently making a carbon fiber one, which we will start selling if anyone wants a sweet fiberglass or carbonfiber FC dash. Also in the process of making the doors.

A flood of pictures will be had in the coming weeks as the car inches closer to being complete. We're taking it to go get painted very soon.

need RX7 · 09-20-2010, 02:23 PM

Quote:

Originally Posted by Rotary no Densetsu

I loooooove the license plate

9krpmrx8 · 09-20-2010, 09:51 PM

Nice work, subscribed.

Rotary no Densetsu · 09-21-2010, 10:50 AM

Taking a break from the car until the tranny for the 3-rotor gets here.

Until then, time to work on my POS AE86.

Fuck yea. Except not.

diabolical1 · 09-25-2010, 06:03 PM

what's the ETA on the tranny?

three projects at one time? that's all out.

i'll keep checking in with this one.

Quote:

Originally Posted by Rotary no Densetsu

I was gonna go with an NA ITB set up, but I feel gay without boost.

this is just bloody hilarious.

Rotary no Densetsu · 10-27-2010, 11:52 PM

tranny is being custom built by Jerico Performance. The first and only 3-rotor tranny they've ever fucked with. It's pretty crazy shit. We had the mock up shit at the shop the last week or so, Jerico got everything back so I dunno about the ETA on the tranny. My guess is "soon" that's 'bout it. rofl

I got a lot more shit I need to post up on here about my 3-rotor car, but I'll do it all at once, so here's some other news.

I FINALLY PULLED THE MOTOR OUT OF MY S5 TII

Plus we ended up making a custom tool, since I couldn't find my flywheel nut rotary tool thinger majig.

rofl whatever, it worked.

So anyway, didn't get pictures of me opening the motor since it was fucking nasty as fuck and my hands were FUCKED

No apex seal gone (Like I was told). Housing was cracked though.

Other than the housing though, everything else was fucking beautiful. So I'm gonna go take this car to get painted when I get back from Vegas in a week or two and start some hardcore progress with it.

lh6601 · 10-30-2010, 08:04 PM

Fuckin epic. BTW, your AE86 is not a POS. Kinda jealous of how clean it looks.

11-22-2009, 02:52 PM	#16
Max777 Pirate Join Date: Mar 2008 Location: Central IL Posts: 1,323 Rep Power: 19	"Just" a driver? That counts as far as I'm concerned! __________________ Rotaries:They are NOT that complicated!

01-12-2010, 01:56 AM	#19
SouthSideSlider Rotary Fan in Training Join Date: Aug 2008 Location: Goose Creek/Summerville Posts: 60 Rep Power: 17	hey buddy. hehehe __________________ 2000 Acura Integra GS: daily driver 1990 Mazda RX-7 GTU: parts car. 1986 Mazda RX-7 base: under the knife.(no sunroof!!!) 1989 Volvo 745 turbo: B230ET,19T turbo,850 Turbo injectors,HKS Manual Boost Controler,Port/Polish,Oversized valves,titanium valve springs,M-Cam,G80 locker,modded AW71 transmission.

09-20-2010, 09:51 PM	#26
9krpmrx8 SARX + Boosted = Win Join Date: Sep 2010 Location: San Antonio, Texas Posts: 70 Rep Power: 15	Nice work, subscribed. __________________

10-30-2010, 08:04 PM	#30
lh6601 Down with OPP Join Date: Mar 2010 Posts: 50 Rep Power: 16	Fuckin epic. BTW, your AE86 is not a POS. Kinda jealous of how clean it looks. __________________ 86 base, TII swapped, Rtek 2.1, some other things. Daily driven.

11-23-2009, 01:10 PM	#17
Rotary no Densetsu Haters gonna hate Join Date: Oct 2008 Location: Charlotte, NC Posts: 70 Rep Power: 17	f**k yeah, rainy drift days. Smashed a wall, backed out of it. Finished the course. Had to pull it back into the pits to check damage and then I went right back out. lmfao I had a blast yesterday. Driftin' at Lowes Motor Speedway. wooooo Gonna 99 spec everything anyway, so it's allllll good. Of course I won't be drifting the car after that 'cause hopefully my two other drift cars will be finished by the time I actually get this car painted.

01-11-2010, 10:58 PM	#18
Rotary no Densetsu Haters gonna hate Join Date: Oct 2008 Location: Charlotte, NC Posts: 70 Rep Power: 17	Shit. Bought another FC today. Gonna throw my old 13bT out of the 20b project car into it. It was a pretty decent streetport motor that still runs. Gonna turn that bitch into a pick-up truck drift car.

02-21-2010, 11:36 PM	#20
Rotary no Densetsu Haters gonna hate Join Date: Oct 2008 Location: Charlotte, NC Posts: 70 Rep Power: 17	Got a few new photos of the black FD from Saturday! Nothin' special. About to be a lot photos and updates on the 3-rotor drift car soon!

07-23-2010, 11:17 AM	#21
Rotary no Densetsu Haters gonna hate Join Date: Oct 2008 Location: Charlotte, NC Posts: 70 Rep Power: 17	Whoa. I have no updated this thinger in a hot minute. It's all good. 'Cause I have not had a ton done. Been busy with running my business and all that crap. So, I have a deadline on the car, it absolutely 1,000,000% needs to be complete and good to go by the time PRI comes around. We have a drift event that week down in Florida, so, we're wanting to knock out two birds with one stone, show it off at our PRI booth along with some other really cool things completely unrelated to rotary, and then test the car out on the track FINALLY. I'm dying to drive this thing right now. Though, I'm going out to Japan this weekend, I won't get a ton of shit done on it. Hopefully my wheels will get here before I get back that way some suspension crap can get done before I get back on the 11th. I also bought a Lexus, not that anyone probably cares. rofl. It has one of them fancy pants 2jz things. Planning slappin' a turbo on that thing and making like 500whp. Yeeeeeh. Oh my, once I start I can't stop ranting. Anyway, here's a couple pictures of some random crap. More updates in the coming months. Knowing me though, I won't update until the car is done. rofl

07-23-2010, 12:50 PM	#23
Rotary no Densetsu Haters gonna hate Join Date: Oct 2008 Location: Charlotte, NC Posts: 70 Rep Power: 17	Yessir! I thiiiiiiink I posted a picture of it in an earlier post. Wow I really need to become more active on here.

09-20-2010, 09:50 AM	#24
Rotary no Densetsu Haters gonna hate Join Date: Oct 2008 Location: Charlotte, NC Posts: 70 Rep Power: 17	This car does not exist, it's a unicorn. We tweeked the fuck out of the dash and are currently making a carbon fiber one, which we will start selling if anyone wants a sweet fiberglass or carbonfiber FC dash. Also in the process of making the doors. A flood of pictures will be had in the coming weeks as the car inches closer to being complete. We're taking it to go get painted very soon.

09-21-2010, 10:50 AM	#27
Rotary no Densetsu Haters gonna hate Join Date: Oct 2008 Location: Charlotte, NC Posts: 70 Rep Power: 17	Taking a break from the car until the tranny for the 3-rotor gets here. Until then, time to work on my POS AE86. Fuck yea. Except not.

10-27-2010, 11:52 PM	#29
Rotary no Densetsu Haters gonna hate Join Date: Oct 2008 Location: Charlotte, NC Posts: 70 Rep Power: 17	tranny is being custom built by Jerico Performance. The first and only 3-rotor tranny they've ever fucked with. It's pretty crazy shit. We had the mock up shit at the shop the last week or so, Jerico got everything back so I dunno about the ETA on the tranny. My guess is "soon" that's 'bout it. rofl I got a lot more shit I need to post up on here about my 3-rotor car, but I'll do it all at once, so here's some other news. I FINALLY PULLED THE MOTOR OUT OF MY S5 TII Plus we ended up making a custom tool, since I couldn't find my flywheel nut rotary tool thinger majig. rofl whatever, it worked. So anyway, didn't get pictures of me opening the motor since it was fucking nasty as fuck and my hands were FUCKED No apex seal gone (Like I was told). Housing was cracked though. Other than the housing though, everything else was fucking beautiful. So I'm gonna go take this car to get painted when I get back from Vegas in a week or two and start some hardcore progress with it.