New Coil Relocation Bracket - Feeler - Page 3

Garfinkles Motor Works · 02-01-2009, 02:55 PM

Up grade to FC coil for 20 to 80 dollars .

AHarada · 02-24-2009, 08:34 PM

Recieved my bracket today. Details can be found here:

http://rotarycarclub.com/rotary_foru...3847#post73847

***Herblenny*** · 02-24-2009, 10:44 PM

I got this unit but haven't had time to install as I can't move my other car

But all that would be resolved after I go visit Garfinkle this friday! I'll post some pics.

jkstill · 02-25-2009, 01:26 PM

Too bad I already installed my Charlies7 bracket...

AHarada · 02-25-2009, 06:42 PM

So did I. I'm switching from Charles7's bracket to this one for a few reasons. The plug wires would pretty much be as short as they possibly could be, it opens up space in the corner of the engine bay, and it just looks less cluttered being out of sight.

Another thing is that this piece is much beefier and much higher quality IMO, and still costs a lot less. I'm not talking down Charlies7's bracket, I had no problems with it, I just prefer this one.

***Herblenny*** · 02-25-2009, 07:49 PM

Quote:

Originally Posted by AHarada

So did I. I'm switching from Charles7's bracket to this one for a few reasons. The plug wires would pretty much be as short as they possibly could be, it opens up space in the corner of the engine bay, and it just looks less cluttered being out of sight.

Another thing is that this piece is much beefier and much higher quality IMO, and still costs a lot less. I'm not talking down Charlies7's bracket, I had no problems with it, I just prefer this one.

Same here.

I did consider Charlie7's. But did not like the idea of much longer wires. This was my personal decision about the longer wire issues and not the quality of is unit.

I would also say this about Garfinkle's bracket.. It might be bit tougher for someone with engine already in the engine bay as you would have to drill some holes. It would make it a much easier install for those who already have their engine out of the car.. Which will be my case..

fire85gslse · 02-26-2009, 10:17 PM

Quote:

Originally Posted by Herblenny

I would also say this about Garfinkle's bracket.. It might be bit tougher for someone with engine already in the engine bay as you would have to drill some holes. It would make it a much easier install for those who already have their engine out of the car.. Which will be my case..

I would agree phil, but with a angle drill you could probably do this from under the car easy.
And your items over here are looking good!!!!! Might want mine to look the same

David, does awesome work!
I wish I had the time to get my car done. Working monday thru friday sucks! Wish i was back on shift work.
Chad

***Herblenny*** · 02-26-2009, 10:20 PM

Quote:

Originally Posted by fire85gslse

I would agree phil, but with a angle drill you could probably do this from under the car easy.
And your items over here are looking good!!!!! Might want mine to look the same

Chad

Chad, are you going to be around tomorrow??

fire85gslse · 02-26-2009, 10:35 PM

Quote:

Originally Posted by Herblenny

Chad, are you going to be around tomorrow??

unless things change I will be working. I was trying to get the day off but Chief is gone all next week also so i have to stay some what close incase needed.
Sometimes I wish I was just a fireman again riding backwards with no cares in the world.

I will be there all day saturday and hope sunday as well. Would love to be able to start it sunday.
When you coming up?
Chad

***Herblenny*** · 02-26-2009, 10:39 PM

Tomorrow night. Leaving early morning to goto Huntsville to check out Ray Wilson tuning..

***Herblenny*** · 03-18-2009, 07:40 AM

I still haven't had a chance installing this.. I'm hoping to start this weekend..

Garfinkles Motor Works · 04-20-2009, 09:23 AM

The mounting hole placement is different on the plates that are being made to send out .A better and stronger arangement .

muibubbles · 06-18-2009, 01:17 PM

have any of the brackets for the 3rd gen coils in stock? how would i place an order? how long should i expect it to take?

Garfinkles Motor Works · 06-19-2009, 08:17 AM

Same day shipping when check comes .

AHarada · 07-10-2009, 01:47 AM

Sorry for the delay Garfinkle.

Here are a few pix of my installation. I will do a more in depth write-up when time allows.

02-24-2009, 10:44 PM	#33
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	I got this unit but haven't had time to install as I can't move my other car But all that would be resolved after I go visit Garfinkle this friday! I'll post some pics. __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

02-26-2009, 10:39 PM	#40
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	Tomorrow night. Leaving early morning to goto Huntsville to check out Ray Wilson tuning.. __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

03-18-2009, 07:40 AM	#41
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 Posts: 644 Rep Power: 10	I still haven't had a chance installing this.. I'm hoping to start this weekend.. __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-01-2009, 02:55 PM	#31
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Up grade to FC coil for 20 to 80 dollars .

02-24-2009, 08:34 PM	#32
AHarada Rotary Fanatic Join Date: Mar 2008 Posts: 162 Rep Power: 18	Recieved my bracket today. Details can be found here: http://rotarycarclub.com/rotary_foru...3847#post73847

02-25-2009, 01:26 PM	#34
jkstill Rotary Fan in Training Join Date: Mar 2008 Posts: 93 Rep Power: 18	Too bad I already installed my Charlies7 bracket...

02-25-2009, 06:42 PM	#35
AHarada Rotary Fanatic Join Date: Mar 2008 Posts: 162 Rep Power: 18	So did I. I'm switching from Charles7's bracket to this one for a few reasons. The plug wires would pretty much be as short as they possibly could be, it opens up space in the corner of the engine bay, and it just looks less cluttered being out of sight. Another thing is that this piece is much beefier and much higher quality IMO, and still costs a lot less. I'm not talking down Charlies7's bracket, I had no problems with it, I just prefer this one.

04-20-2009, 09:23 AM	#42
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	The mounting hole placement is different on the plates that are being made to send out .A better and stronger arangement .

06-18-2009, 01:17 PM	#43
muibubbles Bubble Tech Join Date: Oct 2008 Posts: 161 Rep Power: 18	have any of the brackets for the 3rd gen coils in stock? how would i place an order? how long should i expect it to take?

06-19-2009, 08:17 AM	#44
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 Posts: 535 Rep Power: 18	Same day shipping when check comes .

07-10-2009, 01:47 AM	#45
AHarada Rotary Fanatic Join Date: Mar 2008 Posts: 162 Rep Power: 18	Sorry for the delay Garfinkle. Here are a few pix of my installation. I will do a more in depth write-up when time allows.