New member need help/recommendation

Beginner19 · 01-07-2017, 08:15 PM

I am new here and i do not own a rotary but i wish to own one i always wanted a first gen rx-7. i can get it but i like to work on it on my own, hopefully i can find usefull help here since i never had a rotary but want one so bad any recommendation on my first rotary? On what to get etc my budget for now is 8,000$

speedjunkie · 01-07-2017, 10:13 PM

With $8k you should be able to get a pretty nice first gen. I'd get a GSLSE if I were you. But first gen guys can give you a better idea than I can.

Here are the manuals, you can start learning now.
http://foxed.ca/index.php?page=rx7manual

Beginner19 · 01-08-2017, 12:50 AM

Thank you speedjunkie

t_g_farrell · 01-09-2017, 09:55 AM

Not sure about PR, but here in the states you can get a very nice SA for 5 or 6K or go for
a GSL-SE for about the same price. If you lower your expectations you can get a nice
1st gen for 3K easily anytime.

So what series first gen interests you? Do you want to buy it here and ship to PR? Is that
8K just for the car or for buying/shipping/fixing it? Makes a big difference how you look at it.

Beginner19 · 01-10-2017, 02:43 AM

So i am at south korea right now i am currently in service i will going to kentucky in about 72 days to fort campbell unless my orders change so i want a 12A to start with because as my ID says im a beginner so i want to start humble and easy and the 8k is for buying it and modding it if i like it i will keep investing on it. I just put pr there because im puerto rican

t_g_farrell · 01-10-2017, 08:53 AM

Good choice, the 12A is bullet proof for the most part. If you want to keep it simple I would
go with 12A FBs, not SAs. With an SA (79-80) you will have a lot of unobtanium parts that
will need serviced or replaced. The best FB in my opinion is the 82-3 12A FB, lightest
flywheel and rotating mass (82) and also the lightest chassis of all the 1st gens I think. The
83 divide in the year and have drive shaft differences but can come with a factory LSD as
well.

Personally I like SA, because they were the first iteration.

I think your funding sounds ok to get a nice running example and then make it road
worthy.

Johnny_K · 01-10-2017, 05:15 PM

Get one that running, driving and in good shape.

Beginner19 · 01-10-2017, 08:54 PM

Ok so in pr they bridge them also they sound awesome like that. What are the pros and cons of that?

FC Zach · 01-11-2017, 12:00 AM

Quote:

Originally Posted by Beginner19

Ok so in pr they bridge them also they sound awesome like that. What are the pros and cons of that?

Pros:
-Sound muy bien!

-More power in the higher RPMs
-Sound effing awesome!

Cons:
-Zero MPGs
-Little to no bottom end power
-Sounds like race car. . . oh wait

FC Zach · 01-11-2017, 12:03 AM

Oh, welcome to the forum and thank you for your service!

PS, I love PR. . specifically Culebra. My favorite place to go and where I'd love to retire one day

Beginner19 · 01-11-2017, 02:29 AM

Thank you for your support and i know but i find culebra expensive i recommend rincon honestly or jayuya. So i want it fast too but something i can use as a daily u know. So got any mod suggestions also?

FC Zach · 01-11-2017, 03:01 AM

Quote:

Originally Posted by Beginner19

Thank you for your support and i know but i find culebra expensive i recommend rincon honestly or jayuya. So i want it fast too but something i can use as a daily u know. So got any mod suggestions also?

Yeah, I can see that especially with the hassle of traveling to PR (which is a chore in itself) for larger items other than groceries. . Good for vacation nonetheless.

If you want it to be a daily or at least close to it, I'd stay away from too aggressive of a port. . Ted (t_g_farrell) has done great work with his ignition set-up, I would recommend a direct fire mod like his. I believe he has a write-up on it.

t_g_farrell · 01-11-2017, 08:57 AM

Quote:

Originally Posted by FC Zach

Yeah, I can see that especially with the hassle of traveling to PR (which is a chore in itself) for larger items other than groceries. . Good for vacation nonetheless.

If you want it to be a daily or at least close to it, I'd stay away from too aggressive of a port. . Ted (t_g_farrell) has done great work with his ignition set-up, I would recommend a direct fire mod like his. I believe he has a write-up on it.

Tim, damnit Zach! LOL

So I would recommend first getting it running as stock which means replacing
all the rubber stuff from bushings to hoses on the entire car. Then I would
think about improvements from there.

1. Exhaust - RB SP is the best and best value over the long term and is a well
tuned setup for later performance mods.
2. Ignition - do a DFIS (dual fire ignition system) which gives you a wasted
spark ignition which is much better than the stock ignition. Many writeups here
and on other forums.
3. Modify the Nikki for better flow and performance. I have a write up linked
in my sig but there are others as well.
4. Electric fan
5. Suspension, wheel and tire upgrades.

You do all of these and you will have a very nice performing street car with
very good DD characteristics.

Have fun and keep us posted on what you end up doing.

FC Zach · 01-11-2017, 11:45 PM

Quote:

Originally Posted by t_g_farrell

Tim, damnit Zach! LOL

Damn! I'm awful with names!

For that I completely understand if you never let me try anymore tasty homebrew concoctions you've made ever again.

Beginner19 · 01-12-2017, 02:44 AM

Ok seems legit thank you and what about turbos?

01-07-2017, 08:15 PM	#1
Beginner19 The Newbie Join Date: Jan 2017 Location: Puerto rico iTrader: (0) Posts: 6 Rep Power: 0	New member need help/recommendation I am new here and i do not own a rotary but i wish to own one i always wanted a first gen rx-7. i can get it but i like to work on it on my own, hopefully i can find usefull help here since i never had a rotary but want one so bad any recommendation on my first rotary? On what to get etc my budget for now is 8,000$

01-09-2017, 09:55 AM	#4
t_g_farrell Waffles - hmmm good Join Date: Aug 2008 Location: Huntersville, NC iTrader: (0) Posts: 757 Rep Power: 0	Not sure about PR, but here in the states you can get a very nice SA for 5 or 6K or go for a GSL-SE for about the same price. If you lower your expectations you can get a nice 1st gen for 3K easily anytime. So what series first gen interests you? Do you want to buy it here and ship to PR? Is that 8K just for the car or for buying/shipping/fixing it? Makes a big difference how you look at it. __________________ 1980 GS stockport, Fat Nikki, RB Dual Facetfuel pumps, Holley regulator, RB Street port exhaust, 2GDFIS, MR2 MK I electric fans, 2G strut bar, relayed fans, lights and fuel pump, LEDs Project Fat Nikki Budget 12A rebuild Video setup < $30.00 Last edited by t_g_farrell; 01-09-2017 at 09:57 AM..

01-10-2017, 08:53 AM	#6
t_g_farrell Waffles - hmmm good Join Date: Aug 2008 Location: Huntersville, NC iTrader: (0) Posts: 757 Rep Power: 0	Good choice, the 12A is bullet proof for the most part. If you want to keep it simple I would go with 12A FBs, not SAs. With an SA (79-80) you will have a lot of unobtanium parts that will need serviced or replaced. The best FB in my opinion is the 82-3 12A FB, lightest flywheel and rotating mass (82) and also the lightest chassis of all the 1st gens I think. The 83 divide in the year and have drive shaft differences but can come with a factory LSD as well. Personally I like SA, because they were the first iteration. I think your funding sounds ok to get a nice running example and then make it road worthy. __________________ 1980 GS stockport, Fat Nikki, RB Dual Facetfuel pumps, Holley regulator, RB Street port exhaust, 2GDFIS, MR2 MK I electric fans, 2G strut bar, relayed fans, lights and fuel pump, LEDs Project Fat Nikki Budget 12A rebuild Video setup < $30.00

01-11-2017, 12:03 AM	#10
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN iTrader: (2) Posts: 2,267 Rep Power: 19	Oh, welcome to the forum and thank you for your service! PS, I love PR. . specifically Culebra. My favorite place to go and where I'd love to retire one day __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

01-07-2017, 10:13 PM	#2
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO iTrader: (1) Posts: 2,089 Rep Power: 19	With $8k you should be able to get a pretty nice first gen. I'd get a GSLSE if I were you. But first gen guys can give you a better idea than I can. Here are the manuals, you can start learning now. http://foxed.ca/index.php?page=rx7manual

01-08-2017, 12:50 AM	#3
Beginner19 The Newbie Join Date: Jan 2017 Location: Puerto rico iTrader: (0) Posts: 6 Rep Power: 0	Thank you speedjunkie

01-10-2017, 02:43 AM	#5
Beginner19 The Newbie Join Date: Jan 2017 Location: Puerto rico iTrader: (0) Posts: 6 Rep Power: 0	So i am at south korea right now i am currently in service i will going to kentucky in about 72 days to fort campbell unless my orders change so i want a 12A to start with because as my ID says im a beginner so i want to start humble and easy and the 8k is for buying it and modding it if i like it i will keep investing on it. I just put pr there because im puerto rican

01-10-2017, 05:15 PM	#7
Johnny_K Rotary Fanatic Join Date: Jun 2013 iTrader: (0) Posts: 225 Rep Power: 12	Get one that running, driving and in good shape.

01-10-2017, 08:54 PM	#8
Beginner19 The Newbie Join Date: Jan 2017 Location: Puerto rico iTrader: (0) Posts: 6 Rep Power: 0	Ok so in pr they bridge them also they sound awesome like that. What are the pros and cons of that?

01-11-2017, 02:29 AM	#11
Beginner19 The Newbie Join Date: Jan 2017 Location: Puerto rico iTrader: (0) Posts: 6 Rep Power: 0	Thank you for your support and i know but i find culebra expensive i recommend rincon honestly or jayuya. So i want it fast too but something i can use as a daily u know. So got any mod suggestions also?

01-12-2017, 02:44 AM	#15
Beginner19 The Newbie Join Date: Jan 2017 Location: Puerto rico iTrader: (0) Posts: 6 Rep Power: 0	Ok seems legit thank you and what about turbos?