Pre-Mix Oil What

magpiemini · 04-09-2012, 11:50 AM

I am new to rotary engines and had no idea they had an oil metering pump or you could pre-mix or both. I just read about it in the sticky post.

Where can I read up on this?

Where is this oil metering pump?

What is the recommended setup for racing?

What type of oil should I use?

My5ABaby · 04-09-2012, 12:28 PM

I have an FC so I can't talk much about the OMP on the FB, but I took off my OMP and premix with generic TCW3. Some people will say the expensive premix is better, and it probably is, but I haven't had any issues with the cheap stuff.

12arotary · 04-09-2012, 01:52 PM

I run premix and the omp. (85 with a 12a) 128:1- The way i see it if you only run premix you are taking a risk that you will always remember oil in the gas at the proper ratio. Same running only the omp, if it fails or clogs without you knowing for a while it can cause the same issue.

orion84gsl · 04-09-2012, 06:16 PM

Cheap TCW3 from the parts store. I think I'm currently using Marine grade (whatever the difference may be to others). Mix it 1oz/gal and the car is happy with it. Doesn't hurt the wallet much and I know it's mixing with clean oil. Although it's a fresh rebuild so the oil has been staying clean for a while, but it won't always be that way.

Garfinkles Motor Works · 04-11-2012, 05:22 PM

My car is setup to inject Amsoil hp 2 cycle oil from a 3qt tank that I made .

Rot · 12-02-2013, 02:52 PM

Quote:

Originally Posted by Garfinkles Motor Works

My car is setup to inject Amsoil hp 2 cycle oil from a 3qt tank that I made .

How long have you been using Amsoil HP 2 cycle oil!

dexspeed · 04-11-2012, 08:57 PM

^ Now that sounds interesting and has peaked my curiosity. You should post up some pics of that. I'm sure there are a lot of people that would prefer to do something like that than add oil every time they fill up with gas.

Pete_89T2 · 04-12-2012, 05:35 AM

Quote:

Originally Posted by dexspeed

^ Now that sounds interesting and has peaked my curiosity. You should post up some pics of that. I'm sure there are a lot of people that would prefer to do something like that than add oil every time they fill up with gas.

I did a similar setup on my FC, uses the Rotary Avaition OMP adapter and a 1.5 quart tank that I purchased. Here's a link to the "how to" write-up.

http://www.rotarycarclub.com/rotary_...ad.php?t=14945

infernosg · 04-12-2012, 09:17 AM

Quote:

Originally Posted by Pete_89T2

I did a similar setup on my FC, uses the Rotary Avaition OMP adapter and a 1.5 quart tank that I purchased. Here's a link to the "how to" write-up.

http://www.rotarycarclub.com/rotary_...ad.php?t=14945

This is a great idea if you have a mechanical OMP or are using the stock ECU or an aftermarket ECU capable of driving the electric OMP. Unfortunately I have neither

I could get an S4 front cover and find a mechnical OMP and rig something up but I don't know how that works with the S5 front counterweight and it doesn't solve the problem that I only have 2/4 oil injector ports (custom intake manifold).

To the OP: I would say this is the best option for your SA/FB. You can run dedicated premix in an auxiliary tank and run some nice synthetic oil in the engine.

magpiemini · 04-12-2012, 12:05 PM

I still have not found my omp. Can someone tell me what I am looking for and where it is located on my 1984 RX7 GSL-SE 13b?

Pete_89T2 · 04-12-2012, 12:21 PM

I'm not as familiar with the FB, but it should be in the same place as the FC. Look for it low on the engine's front cover, same side as the intake & exhaust manifolds. It will have some banjo fittings & tubing coming off of it that leads to the oil injectors. The FB will also have a mechnaical rod linkage that goes from the throttle body (GSL-SE model) or to the carb (all other non-FI model SA/FB's)

dr.occa · 04-15-2012, 09:08 PM

Exhaust side just above the oil pan and towards front of motor.

magpiemini · 04-16-2012, 10:46 AM

Thanks, found it. It seems the Marvel Mystery Oil is just as cheap as the TCW3 at O'Reily's so I bought some. So 1 oz per gallon (128:1) along with the omp?

Rotary Evolution · 12-02-2013, 05:42 PM

Quote:

Originally Posted by magpiemini

Thanks, found it. It seems the Marvel Mystery Oil is just as cheap as the TCW3 at O'Reily's so I bought some. So 1 oz per gallon (128:1) along with the omp?

MMO isn't much of a lubricant, and it isn't even remotely comparable to 2 stroke oil.

My5ABaby · 04-16-2012, 11:26 AM

128:1 is the going rate that most recommend. There's been some debate on using MMO instead of TCW3. I personally wouldn't use MMO, but a lot of people do and don't seem to have any problems.

View Poll Results: What oiling setup to use for racing
Leave it stock and run the right engine oil	0	0%
Leave it stock and add some pre-mix	8	53.33%
Disable the metering pump and pre-mix	6	40.00%
Other - I have posted a better idea	1	6.67%
Voters: 15. You may not vote on this poll

04-09-2012, 11:50 AM	#1
magpiemini Rotary Fan in Training Join Date: Mar 2012 Location: Escondido, Ca iTrader: (0) Posts: 75 Rep Power: 13	Pre-Mix Oil What - HELP? I am new to rotary engines and had no idea they had an oil metering pump or you could pre-mix or both. I just read about it in the sticky post. Where can I read up on this? Where is this oil metering pump? What is the recommended setup for racing? What type of oil should I use? __________________ 1984 RX7 GSL-SE Building for the 24 Hours Of Lemons

04-09-2012, 12:28 PM	#2
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (6) Posts: 2,377 Rep Power: 19	I have an FC so I can't talk much about the OMP on the FB, but I took off my OMP and premix with generic TCW3. Some people will say the expensive premix is better, and it probably is, but I haven't had any issues with the cheap stuff. __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."

04-09-2012, 01:52 PM	#3
12arotary tumor-syphilis-itis-osis Join Date: Sep 2008 iTrader: (0) Posts: 191 Rep Power: 17	I run premix and the omp. (85 with a 12a) 128:1- The way i see it if you only run premix you are taking a risk that you will always remember oil in the gas at the proper ratio. Same running only the omp, if it fails or clogs without you knowing for a while it can cause the same issue. __________________ 82 300d 82 Gsl 84 b2200 Diesel 88 gxl

04-12-2012, 12:05 PM	#10
magpiemini Rotary Fan in Training Join Date: Mar 2012 Location: Escondido, Ca iTrader: (0) Posts: 75 Rep Power: 13	I still have not found my omp. Can someone tell me what I am looking for and where it is located on my 1984 RX7 GSL-SE 13b? __________________ 1984 RX7 GSL-SE Building for the 24 Hours Of Lemons

04-09-2012, 06:16 PM	#4
orion84gsl Rotary Fanatic Join Date: Mar 2008 iTrader: (0) Posts: 167 Rep Power: 17	Cheap TCW3 from the parts store. I think I'm currently using Marine grade (whatever the difference may be to others). Mix it 1oz/gal and the car is happy with it. Doesn't hurt the wallet much and I know it's mixing with clean oil. Although it's a fresh rebuild so the oil has been staying clean for a while, but it won't always be that way.

04-11-2012, 05:22 PM	#5
Garfinkles Motor Works RCC Contributor Join Date: Mar 2008 iTrader: (11) Posts: 535 Rep Power: 17	My car is setup to inject Amsoil hp 2 cycle oil from a 3qt tank that I made .

04-11-2012, 08:57 PM	#7
dexspeed The Newbie Join Date: Nov 2011 Location: Ottawa, Ontario iTrader: (0) Posts: 14 Rep Power: 0	^ Now that sounds interesting and has peaked my curiosity. You should post up some pics of that. I'm sure there are a lot of people that would prefer to do something like that than add oil every time they fill up with gas.

04-12-2012, 12:21 PM	#11
Pete_89T2 Lifetime Rotorhead Join Date: Apr 2010 Location: Elkton, MD iTrader: (1) Posts: 874 Rep Power: 15	I'm not as familiar with the FB, but it should be in the same place as the FC. Look for it low on the engine's front cover, same side as the intake & exhaust manifolds. It will have some banjo fittings & tubing coming off of it that leads to the oil injectors. The FB will also have a mechnaical rod linkage that goes from the throttle body (GSL-SE model) or to the carb (all other non-FI model SA/FB's)

04-15-2012, 09:08 PM	#12
dr.occa Rotary Fan in Training Join Date: Mar 2011 iTrader: (2) Posts: 73 Rep Power: 14	Exhaust side just above the oil pan and towards front of motor.

04-16-2012, 10:46 AM	#13
magpiemini Rotary Fan in Training Join Date: Mar 2012 Location: Escondido, Ca iTrader: (0) Posts: 75 Rep Power: 13	Thanks, found it. It seems the Marvel Mystery Oil is just as cheap as the TCW3 at O'Reily's so I bought some. So 1 oz per gallon (128:1) along with the omp? __________________ 1984 RX7 GSL-SE Building for the 24 Hours Of Lemons

04-16-2012, 11:26 AM	#15
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN iTrader: (6) Posts: 2,377 Rep Power: 19	128:1 is the going rate that most recommend. There's been some debate on using MMO instead of TCW3. I personally wouldn't use MMO, but a lot of people do and don't seem to have any problems. __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."