New Oil Cap- Designing NOW!

Rotary13B1 · 03-11-2008, 02:19 PM

Okay folks, this will be a first! Usually I come up with product ideas randomly and jot them down on paper and the machinery starts to roll...and BAM I get an oil cap.

A few people have emailed me and and asked if I offered any other oil caps, because they didn't like the shape or finish of the current one I have. Usually I would say "Too Bad, so sad! Buy a Keychain!!" j/k

So I've started this thread to get some comments and ideas for the next one. So what does this mean for you? You get to voice your opinions/ideas, and if your little creative element gets implemented into the final product, I'll send you a FREE ONE. Yeah, I'm that nice!

So get your thinking caps on!

-Andy

Juice · 03-11-2008, 02:26 PM

How about removing some of the material in the center section to give the inner gears a more real look.

Also how about a satin black rotor cap with chrome detailing. Like the reverse of your aluminum cap.

FYI, I got a bunch of your keychains. My mom got me 3 for an xmas gift like 2 years ago. 2 keychains were the wrong ones. She called to exchange them and you sent out the right ones and told her to keep the wrong ones too. Thanks you rock!

warwickben · 03-11-2008, 07:41 PM

some ideas i have

rotor shape oil cap with the autobots logo. id buy one.
maybe a rotor shape with repu sa,fb,fc,fd and rx8 on them(not all of them on the same one)
one's that have the motor model on them ie 12a 13b ect

and a funny one for when piston guys ask whats a rotor. on the rotor it says dumb piston guy i have two of these inside(ok not funny)

is there any way you could make the rotor spin, like you tighten it with a Allen(sp?) key. and you can flick it and the rotor will spin.
um i think the ones you sell are fine by the way.

ArtsRx7 · 03-11-2008, 11:06 PM

I know some of the caps require t/b elbow removal so if you could make it smaller it would be better.

***Herblenny*** · 03-12-2008, 04:54 PM

I kind of agree with arts.. I've seen some that are too big to use on an FD>

ScreaminRX8 · 03-12-2008, 07:26 PM

Some of my ideas along with others: Rotor shape and maybe have it in anodized colors with chrome accents and or the entire cap in chrome like the current one. I also like the idea of offerring it with repu sa,fb,fc,fd and rx8 on top to choose from and or also the motor model number 12a 13b etc. Another would be Rotor shape with Renesis kinda like the engine cover on the 8. Or like your patch with the Rotor with no piston symbol in it.

Rotary13B1 · 03-12-2008, 09:18 PM

How about the new 40th anniversary logo on top of the rotor? Anyone feeling that?

Yes, I think this NEW Oil Cap will have a max width of about 50mm, maybe even less like 45mm. Would you like the thickness to be scaled correctly or maybe just 10mm thick?

toyzzzz · 03-12-2008, 10:27 PM

Just make the same design smaller so that it works on the FD better, As it is now I have to remove the strut bar for access.

03-13-2008, 07:25 AM

What I think would be cool is to put the "generations" on the rotor faces of the oil cap

Side one: FB 1979-1985
Side two: FC 1986-1992
Side Three: FD 1993-1995

then on the top just have the 40th AE log on the top...

IMO that would be just AWSOME..

You could have the stuff on the faces engraved, embosed,or stickied on.

Boostmaniac · 04-06-2008, 01:06 AM

Quote:

Originally Posted by SpooledupRacing

What I think would be cool is to put the "generations" on the rotor faces of the oil cap

Side one: FB 1979-1985
Side two: FC 1986-1992
Side Three: FD 1993-1995

then on the top just have the 40th AE log on the top...

IMO that would be just AWSOME..

You could have the stuff on the faces engraved, embosed,or stickied on.

+eleventy billion

That is the best damn idea I have heard in a long time.

06-03-2008, 06:05 PM

Quote:

Originally Posted by SpooledupRacing

What I think would be cool is to put the "generations" on the rotor faces of the oil cap

Side one: FB 1979-1985
Side two: FC 1986-1992
Side Three: FD 1993-1995

then on the top just have the 40th AE log on the top...

IMO that would be just AWSOME..

You could have the stuff on the faces engraved, embosed,or stickied on.

thats exactly what I suggested..

I think it would look AWSOME

RotaryXperiment · 03-13-2008, 08:46 AM

yea great idea spooled. and i also agree on just making smaller.

warwickben · 03-13-2008, 09:56 AM

you forgot about sa 78-80 rx7

can some one post a pic of the 40th AE log

03-13-2008, 10:42 AM

Well dang it I need a new oil cap for my turbo engine I just built before I swap it in...

so hopefully I win and u make my design and I get a free one lol

Rotary13B1 · 03-14-2008, 11:13 AM

Interesting idea Dave...

(what if the RX-8 guys complain? lol)

03-11-2008, 02:19 PM	#1
Rotary13B1 Rotary Fanatic Join Date: Feb 2008 Location: SoCal iTrader: (4) Posts: 242 Rep Power: 17	New Oil Cap- Designing NOW! Okay folks, this will be a first! Usually I come up with product ideas randomly and jot them down on paper and the machinery starts to roll...and BAM I get an oil cap. A few people have emailed me and and asked if I offered any other oil caps, because they didn't like the shape or finish of the current one I have. Usually I would say "Too Bad, so sad! Buy a Keychain!!" j/k So I've started this thread to get some comments and ideas for the next one. So what does this mean for you? You get to voice your opinions/ideas, and if your little creative element gets implemented into the final product, I'll send you a FREE ONE. Yeah, I'm that nice! So get your thinking caps on! -Andy __________________ RCC Vendor & Supporter! Last edited by Rotary13B1; 03-11-2008 at 02:38 PM..

03-12-2008, 04:54 PM	#5
*Herblenny* Founder/Administrator/Internet Pitbull :) Join Date: Jan 2008 iTrader: (11) Posts: 644 Rep Power: 10	I kind of agree with arts.. I've seen some that are too big to use on an FD> __________________ DGRR 2013 - Year of 13B www.DealsGapRotaryRally.com http://www.facebook.com/Herblenny

03-12-2008, 07:26 PM	#6
ScreaminRX8 Rotary Fan in Training Join Date: Mar 2008 Location: Eastaboga/Talladega, on the line.. iTrader: (0) Posts: 43 Rep Power: 0	Some of my ideas along with others: Rotor shape and maybe have it in anodized colors with chrome accents and or the entire cap in chrome like the current one. I also like the idea of offerring it with repu sa,fb,fc,fd and rx8 on top to choose from and or also the motor model number 12a 13b etc. Another would be Rotor shape with Renesis kinda like the engine cover on the 8. Or like your patch with the Rotor with no piston symbol in it. __________________ 2005 Titanium Grey RX8 6spd. Tinted windows, third brake light mod, Pettit Racing radio knob, Red LED map and dome lights, Foglight re-wire, Front and rear Rotary accents from Rotary13B1, Custom painted calipers more to come... Last edited by ScreaminRX8; 03-12-2008 at 08:49 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-11-2008, 07:41 PM	#3
warwickben sa rat rod Join Date: Mar 2008 Location: tewksbury ma iTrader: (4) Posts: 408 Rep Power: 17	some ideas i have rotor shape oil cap with the autobots logo. id buy one. maybe a rotor shape with repu sa,fb,fc,fd and rx8 on them(not all of them on the same one) one's that have the motor model on them ie 12a 13b ect and a funny one for when piston guys ask whats a rotor. on the rotor it says dumb piston guy i have two of these inside(ok not funny) is there any way you could make the rotor spin, like you tighten it with a Allen(sp?) key. and you can flick it and the rotor will spin. um i think the ones you sell are fine by the way.

03-11-2008, 11:06 PM	#4
ArtsRx7 The Newbie Join Date: Mar 2008 iTrader: (0) Posts: 23 Rep Power: 0	I know some of the caps require t/b elbow removal so if you could make it smaller it would be better.

03-12-2008, 09:18 PM	#7
Rotary13B1 Rotary Fanatic Join Date: Feb 2008 Location: SoCal iTrader: (4) Posts: 242 Rep Power: 17	How about the new 40th anniversary logo on top of the rotor? Anyone feeling that? Yes, I think this NEW Oil Cap will have a max width of about 50mm, maybe even less like 45mm. Would you like the thickness to be scaled correctly or maybe just 10mm thick?

03-12-2008, 10:27 PM	#8
toyzzzz The Newbie Join Date: Mar 2008 Location: Tucson, Az iTrader: (0) Posts: 20 Rep Power: 0	Just make the same design smaller so that it works on the FD better, As it is now I have to remove the strut bar for access.

03-13-2008, 07:25 AM	#9
SpooledupRacing Guest Posts: n/a	What I think would be cool is to put the "generations" on the rotor faces of the oil cap Side one: FB 1979-1985 Side two: FC 1986-1992 Side Three: FD 1993-1995 then on the top just have the 40th AE log on the top... IMO that would be just AWSOME.. You could have the stuff on the faces engraved, embosed,or stickied on.

03-13-2008, 08:46 AM	#12
RotaryXperiment Rotary Fanatic Join Date: Mar 2008 Location: Bradenton, Fl iTrader: (0) Posts: 136 Rep Power: 17	yea great idea spooled. and i also agree on just making smaller.

03-13-2008, 09:56 AM	#13
warwickben sa rat rod Join Date: Mar 2008 Location: tewksbury ma iTrader: (4) Posts: 408 Rep Power: 17	you forgot about sa 78-80 rx7 can some one post a pic of the 40th AE log

03-13-2008, 10:42 AM	#14
SpooledupRacing Guest Posts: n/a	Well dang it I need a new oil cap for my turbo engine I just built before I swap it in... so hopefully I win and u make my design and I get a free one lol

03-14-2008, 11:13 AM	#15
Rotary13B1 Rotary Fanatic Join Date: Feb 2008 Location: SoCal iTrader: (4) Posts: 242 Rep Power: 17	Interesting idea Dave... (what if the RX-8 guys complain? lol)