Which failed suspension part causes this?

Whizbang · 11-28-2008, 11:52 PM

When you hit a bump, your ass end sways a bit. the struts are new. So i ruled them out. Trying to pin point without spending money replacing EVERYTHING, even though i should anyway.

Fidelity101 · 11-29-2008, 03:22 AM

got a lot of junk in your trunk?

Phoenix7 · 11-29-2008, 03:33 AM

lateral link?????

mazda_wes · 11-29-2008, 10:48 AM

Quote:

Originally Posted by phoenix7

lateral link?????

+1

farberio · 11-29-2008, 07:58 PM

I would check the front diff mount as well.

Fidelity101 · 11-30-2008, 02:41 AM

Quote:

Originally Posted by farberio

I would check the front diff mount as well.

It almost reads like a front diff like front wheel drive diff mount, thats how I first read it hehe.

farberio · 11-30-2008, 09:46 AM

You mean your 7 isn't AWD??

orion84gsl · 11-30-2008, 12:11 PM

Put the car up on jack stands and take a pry bar to all the links and see which ones are deflecting side to side more than they should.

Whizbang · 11-30-2008, 12:13 PM

Ill give it whirl once i can get the car into the garage. But the snow is kinda giving me the finger at the moment.

Fidelity101 · 11-30-2008, 07:55 PM

Quote:

Originally Posted by farberio

you mean your 7 isn't awd??

Flooder · 11-30-2008, 08:06 PM

Check the sway bar. S5's have plastic end links and they are prone to breaking under stress.

Whizbang · 11-30-2008, 08:27 PM

but i have an S4 so that is ruled out

Flooder · 11-30-2008, 10:13 PM

Check anyways?

. If the swaybar isn't working properly it will result in a loss of traction, which equals the rear end coming out easier.

farberio · 11-30-2008, 11:14 PM

And the bushings in the s4 endlinks can go bad.

Fidelity101 · 11-30-2008, 11:47 PM

Quote:

Originally Posted by farberio

And the bushings in the s4 endlinks can go bad.

And! they aren't plastic.

11-28-2008, 11:52 PM	#1
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	Which failed suspension part causes this? When you hit a bump, your ass end sways a bit. the struts are new. So i ruled them out. Trying to pin point without spending money replacing EVERYTHING, even though i should anyway. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

11-29-2008, 03:22 AM	#2
Fidelity101 Reliable Source Join Date: Nov 2008 Location: Michigan/Illinois Posts: 336 Rep Power: 17	got a lot of junk in your trunk? __________________ My Rx-7 Vids

11-30-2008, 12:13 PM	#9
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	Ill give it whirl once i can get the car into the garage. But the snow is kinda giving me the finger at the moment. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

11-30-2008, 08:06 PM	#11
Flooder Rotary Fanatic Join Date: Feb 2008 Location: Tucson, Arizona Posts: 321 Rep Power: 18	Check the sway bar. S5's have plastic end links and they are prone to breaking under stress. __________________ AZRX7.COM Red 1991 A-package(SOLD) Red 1990 GXL(SOLD) White 1989 GTUs(DEAD) Red 1988 Turbo II(DD) Black 1988 Turbo II(SOLD) Rebuilt and street ported motor, Garrett T04E Turbo, 3" Turbo Inlet Duct/AEM Dry Flow Filter, Your Mom's MBC, Blitz FMIC, 890cc and 1000cc injectors, Tomei FPR, Walbro, Rtek 2.1 ECU, Taurus E-Fan, Turbonetics BOV, 3" Motoria/Corksport Turbo Back Exhaust, Emissions Removed, Greddy Boost Gauge, Megan Racing Water Temp Gauge, 5one5 Triple Gauge Pod, AEM Uego, GP Sports Body Kit, Fiber Images CF Hood, S5 Seats, S5 Tails, S5 Alt, Dual Alt Pulley, D2 Coilovers, NRG Quick Release, Shook Motorsports Radiator, HID's, AN/Steel Braided Oil Cooler Lines, SUPER JDM TYTE DRIFT BUTTON www.DensetsuMotorsports.com www.AZRX7.Com www.FloodersAdventure.com

11-30-2008, 08:27 PM	#12
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	but i have an S4 so that is ruled out __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

11-29-2008, 07:58 PM	#5
farberio Rotary Fan in Training Join Date: Mar 2008 Posts: 38 Rep Power: 0	I would check the front diff mount as well.

11-30-2008, 09:46 AM	#7
farberio Rotary Fan in Training Join Date: Mar 2008 Posts: 38 Rep Power: 0	You mean your 7 isn't AWD??

11-30-2008, 12:11 PM	#8
orion84gsl Rotary Fanatic Join Date: Mar 2008 Posts: 167 Rep Power: 18	Put the car up on jack stands and take a pry bar to all the links and see which ones are deflecting side to side more than they should.

11-30-2008, 10:13 PM	#13
Flooder Rotary Fanatic Join Date: Feb 2008 Location: Tucson, Arizona Posts: 321 Rep Power: 18	Check anyways? . If the swaybar isn't working properly it will result in a loss of traction, which equals the rear end coming out easier. __________________ AZRX7.COM Red 1991 A-package(SOLD) Red 1990 GXL(SOLD) White 1989 GTUs(DEAD) Red 1988 Turbo II(DD) Black 1988 Turbo II(SOLD) Rebuilt and street ported motor, Garrett T04E Turbo, 3" Turbo Inlet Duct/AEM Dry Flow Filter, Your Mom's MBC, Blitz FMIC, 890cc and 1000cc injectors, Tomei FPR, Walbro, Rtek 2.1 ECU, Taurus E-Fan, Turbonetics BOV, 3" Motoria/Corksport Turbo Back Exhaust, Emissions Removed, Greddy Boost Gauge, Megan Racing Water Temp Gauge, 5one5 Triple Gauge Pod, AEM Uego, GP Sports Body Kit, Fiber Images CF Hood, S5 Seats, S5 Tails, S5 Alt, Dual Alt Pulley, D2 Coilovers, NRG Quick Release, Shook Motorsports Radiator, HID's, AN/Steel Braided Oil Cooler Lines, SUPER JDM TYTE DRIFT BUTTON www.DensetsuMotorsports.com www.AZRX7.Com www.FloodersAdventure.com

11-30-2008, 11:14 PM	#14
farberio Rotary Fan in Training Join Date: Mar 2008 Posts: 38 Rep Power: 0	And the bushings in the s4 endlinks can go bad.