Kind of tight on the passenger side of the engine bay, but this is how things look.
I drilled a hole next to the radiator. Blitz BOV I traded some parts for. Used some clear tubing I had around instead of normal vac tubing which I didn't have.
The sun was killing this shot, but shows the IC piping.
The Subaru Impreza intake pipe installed.
I used an S4 turbo MAF sensor, changed the connector wiring, and have a piece of filter clamped on.
View from above the turbo. One of the heat shields, Oil and coolant lines installed. Also one of my attempts to fix an exhaust leak. I still have a leak.
Oil feed line and source.
Oil return.
Oil temp source via T fitting.
