Rx7 FC Adjustable Rear Toe Links
 

Rx7 FC Rear Toe Links are now for sale! $175 + Shipping!

The Hex is adjustable with a 1" wrench, and the locking nuts are a
1 1/8th" wrench.


They are a direct fit and allow for standalone rear toe adjustment.

http://i393.photobucket.com/albums/p...ps80e483d4.jpg

http://i393.photobucket.com/albums/p...ps14a9cffc.jpg

http://i393.photobucket.com/albums/p...ps8a045054.jpg


Pm me for info!

What is done to the tapered holes in the subframe and control arms?


Do they travel freely up and down?


Can you get a picture with the center propped up and let the control arms sag as far as they can?

Oh man, I put this in all kinds of the wrong section.

Anyways the taper that you see on the stock links is simply a location finder because the stock toe link studs are significantly smaller than the actual hole. Only the first 3/8th" of the hole is tapered, the rest is a regular non tapered hole. The bolts used in these adjustable links fits and fills the regular non tapered part of the hole allowing for a tight fit and no movement. These has been used on several cars including an 8.8 swapped LS powered FC, which is the sub-frame in the picture.

I will see if I can get a picture like that but my set is back in a driving car.

The holes are tapered I had them machined for inserts. Yeah that's all I needed to hear thanks anyway.