PDA

View Full Version : Speedo and Odometer not working

JL1RX7
08-21-2009, 02:41 PM
So go to drive home from work yesterday and the speedo and Odometer no longer working. Cable still hooked up in the back and into the tranny. Figured the cable must be broken so ordered a new one. Any other ideas or things I need to look at.
Rotary_Rocket_87
08-21-2009, 04:34 PM
highly unlikely, but the speedo drive gear in the tranny might have sheared teeth off. usually the cable goes long before that but it is something else to consider.
Dzire
08-21-2009, 05:11 PM
I had a cable broke on me
My5ABaby
08-21-2009, 06:25 PM
Probably fell off behind the cluster.
JL1RX7
08-21-2009, 06:25 PM
I figured the cable would be the one to go. It had made noise when it was cold back before I left in feburary. Now I just need to research how to change the cable out.
Whizbang
08-21-2009, 10:02 PM
its pretty easy you just have to take some of the dash apart.
JL1RX7
08-22-2009, 09:52 AM
Checked the back of the cluster and it felt like it was still connected. I ordered a new one and will replace it when it comes it. Went hunting in the FSM and didn't see anything on replacing it. But it looks like remove the cluster and feed it through the firewall and reconnect on the tranny. other than that can't think of anything else.