PDA

View Full Version : issues need help


FCTII
05-23-2009, 10:02 PM
so my blow off valve was pretty much worn out it was a knock off hks and it caused a boost leak. i just recently replaced it and now it runs like a champ but the car wont idle. when i unplug the vac hose it idles just fine. if anyone could help me out that would be great.

TehMonkay
05-23-2009, 11:09 PM
idle air mixture might be set too rich, check the fsm, if not that try to adjust the idle speed.

FCTII
05-26-2009, 08:52 PM
i tried everything is there anyone around wausau WI that could help me out check it out i'll throw you some money???

Mazdaracer4fun
06-04-2009, 12:11 AM
take a video of your problems and what you do to keep it running. that will help a lil bit...also make sure the car is at normal operating temperature (fully warmed up) b4 taking video... my rx7 idles funny till its all warmed up ... after that its a dream! lol

FCTII
06-06-2009, 12:07 PM
in order to keep it running i need to hold my foot on the gas even when its warmed up. but it has a real jumpy idle whe the blow off valve it un plugged otherwise it wont idle when its plugged in. i'll take some video tho

TehMonkay
06-07-2009, 03:25 PM
Try and bump up the idle with the screw on the bac valve, i would turn it all the way in first then slowly back it out until it stays running.

FCTII
06-07-2009, 05:52 PM
Try and bump up the idle with the screw on the bac valve, i would turn it all the way in first then slowly back it out until it stays running.

there is no bac valve it was removed before i bought it.