i want a 13B-RE

[rxbrooks7]

well i want to put an RE in my FC but what all will i need to do such a swap i know banzai racing has the motor mounts to do it but will i be able to use my T2 trans will i need a new ECU can i use a PFC lol

[WE3RX7]

You can use your trans. You'll need the appropriate clutch/flywheel/counterweight though.

You will need a better ECU. Standalone.

[WankelsRevenge]

Im thinking about getting this swap done as well. Unfortunatly I dont have the same contacts I used to. What are some good places that offer motors/rebuilds?
Ryan

[rxbrooks7]

well i have sound everything other than the flywheel and clutch and counter weight any ideas

[rxbrooks7]

found lol

[TitaniumTT]

Im thinking about getting this swap done as well. Unfortunatly I dont have the same contacts I used to. What are some good places that offer motors/rebuilds?
Ryan

Illicit Performance. Can do the entire swap for you as well.

FWIW I have the Banzai mounts, I wouldn't reccomend them, ever. Going to be probably building my own soon.

[rxbrooks7]

well what would you charge me for a set of motor mounts lol

[TitaniumTT]

I need your car, and your engine, and I'm not taking on any new projects until November unless I get my slate cleaned. PM Mazpower on this board about the rebuild though.

[WankelsRevenge]

Ill have to check em out. Ideally Id like to order one from a place and have them do a rebuild and a mild dtreet port on it. Im deffinatly gonna do some shopping around though to see what I can find.
Ryan

[rxbrooks7]

well i told the guy with the RE that i want it so ill have time to work all my buggs out hope there wont be too many :suspect: