Any experience with these intake manifold gaskets?

AHarada · 12-18-2008, 01:34 AM

I ordered one for shits and giggles and I got it today.

The picture in the first post is very deceiving and the actual gasket is not that thick. I measured it to be 1.6mm with a micrometer. The stock gasket I measured right under 1 mm for reference.

I'm undecided still if I'll use the stock gasket with silicone or this. My stock gasket looks pretty beat up though so I might just throw this in.

12-18-2008, 01:34 AM	#7
AHarada Rotary Fanatic Join Date: Mar 2008 Posts: 162 Rep Power: 18	I ordered one for shits and giggles and I got it today. The picture in the first post is very deceiving and the actual gasket is not that thick. I measured it to be 1.6mm with a micrometer. The stock gasket I measured right under 1 mm for reference. I'm undecided still if I'll use the stock gasket with silicone or this. My stock gasket looks pretty beat up though so I might just throw this in.