It looked so simple at first!

GySgtFrank · 11-03-2013, 12:57 PM

If anyone needs more proof that I'm an idjit.

upper arm by GySgtFrank, on Flickr

When I put the upper mounts in they needed to sit where my new frame rails were at in order to get my Instant Center/Roll Center correct. Sooo. More cutting and fitting will be called for. Waiting on a digital caster/camber gauge so I can do final positioning on the A arms. (This is where I think it has to be, we'll see)

Setting my roll center to 1/2" above the ground and centered on the chassis. Initial setting for caster will be 5 to 7 degrees positive. Camber will be at zero with my adjustment all the way down. I'll use spacers to set that where I need it later.

11-03-2013, 12:57 PM	#10
GySgtFrank Professional Stick Poker Join Date: Feb 2011 Location: Stafford, Ks. Posts: 1,018 Rep Power: 16	If anyone needs more proof that I'm an idjit. upper arm by GySgtFrank, on Flickr When I put the upper mounts in they needed to sit where my new frame rails were at in order to get my Instant Center/Roll Center correct. Sooo. More cutting and fitting will be called for. Waiting on a digital caster/camber gauge so I can do final positioning on the A arms. (This is where I think it has to be, we'll see) Setting my roll center to 1/2" above the ground and centered on the chassis. Initial setting for caster will be 5 to 7 degrees positive. Camber will be at zero with my adjustment all the way down. I'll use spacers to set that where I need it later. __________________ 1988 N/A SE 2+2, dead stock and staying that way. 1979 SA22C stock? Not so much. http://rotarycarclub.com/rotary_foru...ad.php?t=15585