Actual Rotary Displacement Request

RICE RACING · 06-03-2011, 06:16 PM

Just remember

Each engine is only *honestly* rated for displacement AFTER (ALL OF ITS ELEMENTS) have completed one cycle of work.

Elements = ALL individual combustion faces
Cycle = defined by power pulse (or simply spark firing) *remember suck sqeeze bang blow*

It's not a hard concept to fathom honestly ......... some always struggle cause they don't know how the 2 storke or 4 stroke or Wankel actually work though!

Define the cycle!
Count the faces!
There is your answer for displacement!

Equivalence (like I mentioned in my second post) can be used to compare the 13B to other non wankel cycles (as defined by time to displacement), IE displaces 1308cc in 360deg or 2616cc in 720deg, but it only does its wankel cycle in 1080deg which my friends = 3924cc in 13B form, nothing less!

06-03-2011, 06:16 PM	#11
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia Posts: 1,688 Rep Power: 19	Just remember Each engine is only honestly rated for displacement AFTER (ALL OF ITS ELEMENTS) have completed one cycle of work. Elements = ALL individual combustion faces Cycle = defined by power pulse (or simply spark firing) remember suck sqeeze bang blow It's not a hard concept to fathom honestly ......... some always struggle cause they don't know how the 2 storke or 4 stroke or Wankel actually work though! Define the cycle! Count the faces! There is your answer for displacement! Equivalence (like I mentioned in my second post) can be used to compare the 13B to other non wankel cycles (as defined by time to displacement), IE displaces 1308cc in 360deg or 2616cc in 720deg, but it only does its wankel cycle in 1080deg which my friends = 3924cc in 13B form, nothing less! __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration