Racing Beat Collector/ streetable header

NoDOHC · 06-27-2010, 08:37 AM

I have Dynaflow straight-through mufflers for a piston engine on mine and they have lasted for many years (I think 5 or 6). They are welded to the factory y-pipe.

With factory porting, racing beat headers and no presilencer, they were not bad at all. With modified exhaust ports, they were a bit loud, so I added a Racing Beat presilencer. (Now the car is acceptably quiet under 3,000 RPM - It still sounds like a weedwacker on crack above that though).

I have complete racing beat exhaust on my '91 and it is normal car quiet (you don't hear the engine unless you stand on it, then you mostly hear the fan).

06-27-2010, 08:37 AM	#4
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin Posts: 855 Rep Power: 18	I have Dynaflow straight-through mufflers for a piston engine on mine and they have lasted for many years (I think 5 or 6). They are welded to the factory y-pipe. With factory porting, racing beat headers and no presilencer, they were not bad at all. With modified exhaust ports, they were a bit loud, so I added a Racing Beat presilencer. (Now the car is acceptably quiet under 3,000 RPM - It still sounds like a weedwacker on crack above that though). I have complete racing beat exhaust on my '91 and it is normal car quiet (you don't hear the engine unless you stand on it, then you mostly hear the fan). __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)