|
RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections. |
Welcome to Rotary Car Club. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. |
|
Thread Tools | Display Modes |
02-21-2009, 07:09 PM | #1 |
Needing a new tow rig.
|
Clutch pedal mount, is this right?
Could anybody check thier FD and let me know if this is anywhere near correct. I have a hard time believing it if it is? im going to check the FSM but if anyone can check thiers for me that would help too.
|
02-21-2009, 07:34 PM | #3 |
RCC Contributor
|
I dont recall the big washer thing but it can only really line up one way
__________________
David Jerome Broker for Speed For Sale LLC (David@SpeedForSale.com) (Pre-owned RX7/sports car sales & new parts sales/installs/tuning) PM me about low priced, high quality port work |
02-21-2009, 08:55 PM | #4 |
Needing a new tow rig.
|
ok so i found a pic of what my trashed FD had. As you can see the top is mounted correctly and so is the bottom at the fire wall. now i took mine out of my current FD and tried to line it up with this stripped FD shell that as you can see had a pedal mounted correctly and it will not mount correctly in this one either???? WTF it dosent look bent or anything so anybody got any ideas???
z OK so i took some measurements and obviously the pedal is too short but WHY????? From to the firewall to the top mount stud is around 9.5" but my pedal is about 8.X" take look at these and heres the clutch pedal in question. Now the only thing i can think is the top bracket was out of alignment when spot welded and some how made it through into the car????? WTF so it looks like to fix it i will have to drill out the spot welds realign it at the correct length and then tig it back together. another thing that i should state is the only difference between these two cars im testing this off of is the black one is a 94 and the montego blue is a 93. z Last edited by proz07; 02-21-2009 at 09:16 PM.. |
02-21-2009, 10:06 PM | #6 |
Rotary Fan in Training
|
The parts numbers are the same in the '93 and '94 parts fiche. In this picture, it looks like there is a hole behind the stud. Could you move the stud back to the hole behind it?
__________________
'93 SSM RX-7 '93 BB RX-7 '04 BB RX-8 |
02-21-2009, 10:34 PM | #7 |
Needing a new tow rig.
|
there is a hole there but its offset and only goes through the first layer of sheet metal and is offset by about an inch if i remember right. that could be an option but id rather cut and reweld the clutch bracket correctly as you can see in the pic the top mount point isnt even flush its angled upwards.
hey if anyone with a 94+ could take a picture of theres we could compare but by the measurments between a 93 and a 94 they are the same. z Last edited by proz07; 02-21-2009 at 10:40 PM.. |
04-12-2009, 06:04 PM | #8 |
Needing a new tow rig.
|
Fixed!! not pretty but fixed. i had to drill out the spot welds holding the bracket in place, reposition it and weld it back together. i also had to redrill holes and make holders for the spring retainers so it keeps the same spring pressure and pedal feel.
crap welds spring tabs z |
04-16-2009, 04:42 PM | #12 |
Needing a new tow rig.
|
well kinda makes ya wonder dont it even has the FD01 code and everything wonder what a fc clutch pedal looks like? or some typr of explanation as to why there is this piece of s*** pedal in my car from the factory? But i have no way of know if it came that way or not. oh well fixed now.
z |