FS: GSL-SE complete suspension swap w RB springs, tockio hp's, hawk hp's, rotors

mazdadude7 · 02-24-2008, 01:08 PM

I have been wanting to finish my project for a long time but I am not sure if its going to happen so I am going to see the interest in selling my parts. I have a gsl-se sup. setup that has racing beat springs for the front and rear matched with tockio hp shocks, s.s. brake lines, hawk hp pads, and new rotors (they have surface rust but they are new) I would like to sell all of this as a whole. All the parts are new except for the gsl-se rear and front swap. I would say I have about $1400 in this but I think $1200 is fair.

I have a complete urathane bushing kit it was $160 but i will sell it for $130

If you really wanna set off the swap you can buy my ultra rare volk racing wheels they are 14" gold mesh wheels with a chrome lip (This is the only size made in this wheel) They have a set of bfg tires that I waited 3 months for them to make. I would like $1200 for the wheels and tires.

pictures can be taken just let me know what you want to see and I will add it to my photobucket account. http://s126.photobucket.com/albums/p111/mazdadude7/

If you have any questions let me know pm or call (828) 342-7590

WE3RX7 · 02-27-2008, 03:42 PM

I'd like to see the wheels - just to see them (I just bought new tires and wouldnt need new wheels just yet).

Would you sell tokicos separately or are you looking to sell it all as a whole?

mazdadude7 · 02-27-2008, 10:57 PM

I would like to sell as a whole but if I get enough interest in all the parts, I can part it out. I just dont want to be stuck with set of rotors or front springs... and I am trying to find the camera still so i will get a better picture than this old one>>>> http://s126.photobucket.com/albums/p...Picture459.jpg

WE3RX7 · 02-29-2008, 04:39 PM

Yea - thats fine, completely understandle... let us know if you do decide to sell separate.

jtbshaw · 06-16-2008, 11:21 AM

Would you be interested in selling the complete front setup?

mazdadude7 · 09-07-2008, 11:16 PM

Bump Im looking to get rid of this stuff I would sell full setup w/o wheels for $700 and w/ 1400 Thats alot for a 1st gen I know but your also getting alot. all prices are obo.

mazdadude7 · 10-30-2008, 05:43 PM

just sold the springs, shocks and urathane bushing kit. Still up for grabs gsl-se front and rear swap (no shocks or struts) all 4 rotors, front and rear hawk hp pads, s.s. brake lines.

unrelated parts for sale:

12at motor, ecu (stock), and hks intercooler adapter.

Microtech ecu (fuel & timing) with hand controler and laptop adapter.

first gen solid motor mounts

14" volk wheels w/bfg tires for gsl-se and other 4 x 114.3 paterns

treceb · 01-09-2009, 02:00 PM

im interested in the rear. if that guy still looking for the front maybe we can work something out.

mazdadude7 · 03-01-2009, 10:38 PM

I sold the springs and shocks as well as the urathane bushing kit. so Guess i am parting it out!!

mazdadude7 · 03-04-2009, 08:34 AM

sorry didnt put a price: gsl-se sup. (no springs or shocks) with new rotors, new ss brake liines,and hawk hp pads. This all goes for $400 I will throw in the volk wheels under the first gen section for 600 instead of 700 for a package deal. I Think the prices are more than fair but if for some reason you have another offer go ahead and let me know.

mazdadude7 · 09-06-2009, 11:23 PM

just powder coated the front spindles and epoxy painted the front calipers and rotors black. More pictures to come.

mazdadude7 · 10-18-2009, 09:24 PM

still for sale. I havent had the time to get any further on the spindles.

sikest1 · 10-29-2009, 10:06 PM

Do you have SE rear axles and front spindles? Might also be willing to take the brakes dop

mazdadude7 · 10-30-2009, 09:39 PM

Quote:

Originally Posted by sikest1

Do you have SE rear axles and front spindles? Might also be willing to take the brakes dop

yes I have the rear axle and front spindles.

sikest1 · 11-02-2009, 11:43 AM

send me a pm with details
thanks

02-24-2008, 01:08 PM	#1
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	FS: GSL-SE complete suspension swap w RB springs, tockio hp's, hawk hp's, rotors I have been wanting to finish my project for a long time but I am not sure if its going to happen so I am going to see the interest in selling my parts. I have a gsl-se sup. setup that has racing beat springs for the front and rear matched with tockio hp shocks, s.s. brake lines, hawk hp pads, and new rotors (they have surface rust but they are new) I would like to sell all of this as a whole. All the parts are new except for the gsl-se rear and front swap. I would say I have about $1400 in this but I think $1200 is fair. I have a complete urathane bushing kit it was $160 but i will sell it for $130 If you really wanna set off the swap you can buy my ultra rare volk racing wheels they are 14" gold mesh wheels with a chrome lip (This is the only size made in this wheel) They have a set of bfg tires that I waited 3 months for them to make. I would like $1200 for the wheels and tires. pictures can be taken just let me know what you want to see and I will add it to my photobucket account. http://s126.photobucket.com/albums/p111/mazdadude7/ If you have any questions let me know pm or call (828) 342-7590

10-29-2009, 10:06 PM	#13
sikest1 pwrdbyrotorcuzpistnsrweak Join Date: Sep 2009 Location: Cambridge, On Posts: 36 Rep Power: 0	parts Do you have SE rear axles and front spindles? Might also be willing to take the brakes dop

11-02-2009, 11:43 AM	#15
sikest1 pwrdbyrotorcuzpistnsrweak Join Date: Sep 2009 Location: Cambridge, On Posts: 36 Rep Power: 0	Sweet send me a pm with details thanks

02-27-2008, 03:42 PM	#2
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	I'd like to see the wheels - just to see them (I just bought new tires and wouldnt need new wheels just yet). Would you sell tokicos separately or are you looking to sell it all as a whole?

02-27-2008, 10:57 PM	#3
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	I would like to sell as a whole but if I get enough interest in all the parts, I can part it out. I just dont want to be stuck with set of rotors or front springs... and I am trying to find the camera still so i will get a better picture than this old one>>>> http://s126.photobucket.com/albums/p...Picture459.jpg

02-29-2008, 04:39 PM	#4
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	Yea - thats fine, completely understandle... let us know if you do decide to sell separate.

06-16-2008, 11:21 AM	#5
jtbshaw ORD - Old Rotary Dude Join Date: Feb 2008 Location: Pelham, AL Posts: 319 Rep Power: 18	Would you be interested in selling the complete front setup?

09-07-2008, 11:16 PM	#6
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	Bump Im looking to get rid of this stuff I would sell full setup w/o wheels for $700 and w/ 1400 Thats alot for a 1st gen I know but your also getting alot. all prices are obo.

10-30-2008, 05:43 PM	#7
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	just sold the springs, shocks and urathane bushing kit. Still up for grabs gsl-se front and rear swap (no shocks or struts) all 4 rotors, front and rear hawk hp pads, s.s. brake lines. unrelated parts for sale: 12at motor, ecu (stock), and hks intercooler adapter. Microtech ecu (fuel & timing) with hand controler and laptop adapter. first gen solid motor mounts 14" volk wheels w/bfg tires for gsl-se and other 4 x 114.3 paterns

01-09-2009, 02:00 PM	#8
treceb The Newbie Join Date: Mar 2008 Posts: 4 Rep Power: 0	im interested in the rear. if that guy still looking for the front maybe we can work something out.

03-01-2009, 10:38 PM	#9
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	I sold the springs and shocks as well as the urathane bushing kit. so Guess i am parting it out!!

03-04-2009, 08:34 AM	#10
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	sorry didnt put a price: gsl-se sup. (no springs or shocks) with new rotors, new ss brake liines,and hawk hp pads. This all goes for $400 I will throw in the volk wheels under the first gen section for 600 instead of 700 for a package deal. I Think the prices are more than fair but if for some reason you have another offer go ahead and let me know.

09-06-2009, 11:23 PM	#11
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	just powder coated the front spindles and epoxy painted the front calipers and rotors black. More pictures to come.

10-18-2009, 09:24 PM	#12
mazdadude7 Rotary Fanatic Join Date: Feb 2008 Location: Franklin, NC Posts: 410 Rep Power: 18	still for sale. I havent had the time to get any further on the spindles.