New:SuperPro Suspension Bushing kit & Noltec Motor Mounts

[JKL Racing Engineering]

We are proud to announce that we are now distributing Superpro Performance Suspension Bushing Kit and Noltec Motor Mounts. We will be offering SuperPro Bushing kits for FB, FC, and FD; Noltec Motor Mounts for FD.


Superpro Performance Suspension Bushing Kit











This kit includes total 24 bushings:

Descriptions--------Quantity
1. diff.......................2
2. toe links................4
3. trailing arms...........2
4. shock mounts.........2
5. rear upper arms.......4
6. front arms..............8
7. steering rack...........2

We also accept orders on individual bushings, so feel free to contact us.

Descriptions and Introductions on SuperPro Performance Bushing Kit:

The Polyurethane that is specifically blended for the SuperPro product has mechanical properties that make is extremely successful in its application. The properties of extreme resistance to abrasion, low compression set, high tear strenth and a resistance to oils and solvents make it ideal fo automotive applications. These properties lead to a resilient product that is highly versatile in its applications.

The crush tubing is an integral component of the suspension bushing system and is necessary for free pivoting. The crush tubes are made to precision tolerances to ensure that the precise fits are maintained. All SuperPro tubes are made of STEEL & ZINC plated for corrosion protection and appearance. In some applications SuperPro incorporates end knurls and hardened tubes to provide positive location. As required SuperPro provides presion machined steel SHELLS to allow the installer to quickly and easily replace worn components.

When polyurethane is used to replace rubber in many suspension applications, it often has to accommodate large variances in tolerances.

Rubber is not a precision component and will compress or distort readily to allow fitment, which in turn creates binding of the bushings. This is one of the main reasons why SuperPro polyurethane is superior to rubber bushings, as they have a free pivoting point and not a torsion pivot like rubber. SuperPro had to develop a method of achieving the correct pre-loads while still accommodating a range of variances in sizes. Bullet grooves allow the bushings to flex and accept a much wider range of sizes while still maintaining free pivoting of the bushings.

We have a limited quantity in stock right now and ready to ship. We offer discounted WorldWide shipping rates. We also offer SuperPro Bushing Kits for other rotary cars (RX2, RX3, RX4, etc.) so please don't hesitate to contact us for your special orders.

Prices/Payment Instructions:
This offer is exclusively for RCC forum members so please include your RCC forum username during paypal process and please post here with the exact username account to verify the sending of payments.

Full FD3S SuperPro Adjustable Suspension Kit: (Shipping will be $19 Fully Insured)
$500 (local pick up)
$505 (paypal e-check) = $524.00
$500 + 3% paypal fee (all other paypal payments) = $534.57

We also offer the following individual SuperPro Suspension Bushings: (Limited quantity in stock, please contact us for pricing)
1. Rear Upper Arms
2. Rear Differential
3. Rear Shock Absorber
4. Rear Toe Control Arms
5. Rear Trailing Arms
6. Front Steering Rack

We offer customized Superpro Bushing Kits tailored to each individual customer's needs. Please email JKL Racing Engineering at sales@jklre.com for specific pricing.



Noltec Motor Mounts Kit





POLYURETHANE ENGINE MOUNTS
Noltec are the first in Australia to release a range of polyurethane performance engine & transmission mounts for roaring 6cyl, V6 & V8 Ford & Holdens, and highly modified 4 cylinder vehicles. Utilising Noltec ‘Softride’ material, engineers have developed mounts that were extremely flexible, absorbent, robust and also restrictive. By adding a ‘gate’ design concept
to the mount, the mount locks and becomes a solid under heavy acceleration loads.
By locking, the mounts restrict torque roll and prevent further loss of power output.
All of the mounts from Noltec’s range incorporate this gate or ‘Torque Motion
Restrictor’. All mounts are proudly Australian Made and Noltec will look to expand
the range to coincide with demand.

RESTRICTS TORQUE ROLL
MINIMISING POWER
TRANSFER LOSS
BENEFITS
• Stop torque rolling
• Reduce torque steer in FWD vehicles
• Increase high performance acceleration
• Minimise damage to components
(ie. Exhaust) from excessive engine movement

TORQUE MOTION RESTRICTOR - TMR
Incorporating a ‘gate’ design concept that locks under heavy acceleration, the mount ultimately restricts the amount of torque motion resulting in the optimum torque transfer to the differential and power transfer to the wheels.

We also offer special orders on Complete Noltec Suspension Packages for all your suspension bushings for your rotary. We also offer Noltec Kits for other rotary cars (RX2, RX3, RX4, etc.) so please don't hesitate to contact us for your special orders.

Prices: (Shipping will be $18 Fully Insured)
Noltec FD3S/FC3S Motor Mounts:
$200 (local pick up)
$205 (paypal e-check) = $223.00
$200 + 3% paypal fees (all other paypal payments) = $224.54


Purchase List:
SuperPro Bushing Kit:
1. FD3S customized package 18 bushing kit (Richard)
2. FD3S Rear Differential Bushings (Jerry)
3. FD3S Full Kit (Josh)
4. FD3S Full Kit (Sean)

Noltec Motor Mounts:
1. FD3S - RXtacy (Mike)
2. FD3S - chifunkera (Chirag)
3. FD3S - speedjunkie (Eric)
4. FD3S - Alien7 (Michael)

[SLOASFK]

Spectacular!

[David Jerome]

What is the price on just the steering rack?

[chifunkera]

I am interested in a set.

[mdude]

We currently have both Superpro Suspension bushings and noltec motor mounts in stock.

[Herblenny]

Awesome PRICE!!! I'm going to get a set!!! Thanks for offering this to the community!

[RXtacy]

In the first picture of the motor mounts the noltec looks thicker then in the two subsequent photos, is that just an ilusion or are they different?

[mdude]

It's just the angle, don't worry the noltec motor mounts you receive from us will fit your car but if you have a 93 car you must either get a 94 driver side motor mount or a 93 passenger side motor mount(remove the heat shield) in order to install the noltecs.

[RXtacy]

Money sent for a pair of Noltecs.

[mdude]

Thanks. Those should be sent out soon. Tell us when you receive them.

[JKL Racing Engineering]

Originally Posted by Herblenny

Awesome PRICE!!! I'm going to get a set!!! Thanks for offering this to the community!

Phil, thanks for setting up this community so we have the chance to offer more great products to more people.

Let us know anytime if you need a set!

[mdude]

Still have some Superpro bushing kits and noltec motor mounts for the fd and fc.

[My5ABaby]

How does the ride quality compare to stock/rubber mounts in the context of vibration? I'd like to replace my old stock mounts at some point but I like being comfortable and not having my colon shaken like a martini.

[mdude]

I will ask some owners to post some of their experiences with these bushings.

[mdude]

From other reviews i have been reading, the superpros will feel alot tighter than your old suspension unless you have already changed the bushings out. Also there doesn't seem to be any more noise. These bushings will be stiffer than the stock rubber ones but are not harsh at all.

If any other people want to comment, please do.