1988 10AE parting out

88turboii · 03-11-2012, 04:43 PM

Bare Chassis $500.. a lot of rust, sat in a field for several years. dent in rear quarter panel, does not have original windshield. does not come with wheels in picture or sideskirts, lip, or front bumper. no interior, no drivetrain. If nobody wants it i will pull the 10AE windows, hatch, and badges and sell those separate SOLD

S4 TII engine $1500. 30k miles on rx7world rebuild with RA super apex seals. It always had a slight vibration, but has not affected it as far as running, compression is perfect. it was making 300whp at 15psi on a S5 hybrid turbo, on a conservative steve kan tune. does not come with injectors or turbo SOLD
ACT HD PP and clutch $150, about 30k miles on it
TII tranny $200. 5th gear grinds, but works with a little rev matching SOLD
S4 TII LSD $150 SOLD
S4 TII Koyo rad $250 SOLD
ARC top-mount intercooler $200
TII brakes $100
TII slotted rotors $50
sideskirts $200
S5 front bumper $150
JDM FTP's $100 SOLD
CP Racing 4-point front strut brace $100
rear camber rod $50
SS oil cooler lines $100 SOLD

I can bring some of this stuff to DGRR if you want to pick it up there

88turboii · 03-13-2012, 06:11 PM

some pics..

I have a full set of slotted TII rotors, even though just two are pictured, i just havent pulled the rears yet

and here is the 4-point strut bar

and the ARC top mount intercooler

88turboii · 03-13-2012, 06:21 PM

The Throttle body adapter and coupler will also come with it (shown in strut bar pic)

I will get some pics of the FTPs tomorrow

88turboii · 03-16-2012, 06:57 AM

s5 bumper $150 and sideskirts $200. one of the turn lenses is cracked

S4 TII transmission, 5th gear grinds a little, but all other gears shift fine, $200

88turboii · 03-22-2012, 12:30 PM

FTPs sold

funkspectrum · 03-22-2012, 02:31 PM

I need the badges if you decide to part with those.

88turboii · 03-25-2012, 03:36 PM

im keeping the badges. everything but the ftps and ss oil cooler lines is still available

rotarydream · 03-26-2012, 11:44 PM

NM.

infernosg · 03-27-2012, 12:30 PM

Do you have any pictures of the strut tower bar on the car? I have a custom intake manifold and I'm wondering if it'll fit.

88turboii · 03-28-2012, 07:32 AM

sorry the strut bar is sold also, i updated original post

Drama · 03-28-2012, 11:03 AM

what condition is the side windshield trim like.

88turboii · 04-02-2012, 08:06 AM

not very good. its chipped up like normal

88turboii · 06-11-2012, 08:52 PM

shell is gone, but i still have the 10AE doors w/bronze glass, as well as bronze 10AE rear hatch

Raksj04 · 06-25-2013, 06:24 AM

Do you still have rear capliers? I need both sides.

88turboii · 06-25-2013, 07:22 AM

sorry everything is either gone or im using it on my new FC

03-11-2012, 04:43 PM	#1
88turboii destroy, rebuild, repeat Join Date: Feb 2008 Location: Charleston, SC Posts: 395 Rep Power: 18	Bare Chassis $500.. a lot of rust, sat in a field for several years. dent in rear quarter panel, does not have original windshield. does not come with wheels in picture or sideskirts, lip, or front bumper. no interior, no drivetrain. If nobody wants it i will pull the 10AE windows, hatch, and badges and sell those separate SOLD S4 TII engine $1500. 30k miles on rx7world rebuild with RA super apex seals. It always had a slight vibration, but has not affected it as far as running, compression is perfect. it was making 300whp at 15psi on a S5 hybrid turbo, on a conservative steve kan tune. does not come with injectors or turbo SOLD ACT HD PP and clutch $150, about 30k miles on it TII tranny $200. 5th gear grinds, but works with a little rev matching SOLD S4 TII LSD $150 SOLD S4 TII Koyo rad $250 SOLD ARC top-mount intercooler $200 TII brakes $100 TII slotted rotors $50 sideskirts $200 S5 front bumper $150 JDM FTP's $100 SOLD CP Racing 4-point front strut brace $100 rear camber rod $50 SS oil cooler lines $100 SOLD I can bring some of this stuff to DGRR if you want to pick it up there __________________ 1993 RX-7 Touring MB, stockport 13B-REW, 9.4CR rotors, T04S 60-1/p-trim single turbo 1986 RX-7 Base project track beast Last edited by 88turboii; 06-25-2013 at 07:25 AM.

03-16-2012, 06:57 AM	#4
88turboii destroy, rebuild, repeat Join Date: Feb 2008 Location: Charleston, SC Posts: 395 Rep Power: 18	s5 bumper $150 and sideskirts $200. one of the turn lenses is cracked S4 TII transmission, 5th gear grinds a little, but all other gears shift fine, $200 __________________ 1993 RX-7 Touring MB, stockport 13B-REW, 9.4CR rotors, T04S 60-1/p-trim single turbo 1986 RX-7 Base project track beast Last edited by 88turboii; 06-11-2012 at 08:51 PM.

03-25-2012, 03:36 PM	#7
88turboii destroy, rebuild, repeat Join Date: Feb 2008 Location: Charleston, SC Posts: 395 Rep Power: 18	im keeping the badges. everything but the ftps and ss oil cooler lines is still available __________________ 1993 RX-7 Touring MB, stockport 13B-REW, 9.4CR rotors, T04S 60-1/p-trim single turbo 1986 RX-7 Base project track beast

03-27-2012, 12:30 PM	#9
infernosg IT'S ALIVE! Join Date: Dec 2009 Location: Richmond, VA Posts: 811 Rep Power: 16	Do you have any pictures of the strut tower bar on the car? I have a custom intake manifold and I'm wondering if it'll fit. __________________ '86 Mazda RX-7 Base '79 Mazda RX-7 GS

03-28-2012, 07:32 AM	#10
88turboii destroy, rebuild, repeat Join Date: Feb 2008 Location: Charleston, SC Posts: 395 Rep Power: 18	sorry the strut bar is sold also, i updated original post __________________ 1993 RX-7 Touring MB, stockport 13B-REW, 9.4CR rotors, T04S 60-1/p-trim single turbo 1986 RX-7 Base project track beast

03-22-2012, 12:30 PM	#5
88turboii destroy, rebuild, repeat Join Date: Feb 2008 Location: Charleston, SC Posts: 395 Rep Power: 18	FTPs sold

03-22-2012, 02:31 PM	#6
funkspectrum Know what Nemesis means? Join Date: Aug 2008 Location: Santa Rosa, CA Posts: 45 Rep Power: 0	I need the badges if you decide to part with those.

03-26-2012, 11:44 PM	#8
rotarydream GT4202 REW FC Join Date: Aug 2010 Posts: 33 Rep Power: 0	NM.

03-28-2012, 11:03 AM	#11
Drama Rotary Fanatic Join Date: Feb 2008 Location: Richmond,Ky Posts: 227 Rep Power: 18	what condition is the side windshield trim like. __________________ 10th A.E. with 94 Twin Turbo FD Engine, With a precision turbo SC 60. Tokico Blues, B & G springs, Racing beat sway bars, Fender braces, F & R strut braces, Stainless brake hose`s, Toe eliminator busings, Carbon/Kelvar GT300 hood, Depo Gauges,Catz fogs,Sparco 383 steering wheel, 3rd gen shifter knob. Falken Anzenis Rt 615`s Front wheels 17X8+35 245/40 Rear wheels 17X9+44 with 5mm spacer 275/40

04-02-2012, 08:06 AM	#12
88turboii destroy, rebuild, repeat Join Date: Feb 2008 Location: Charleston, SC Posts: 395 Rep Power: 18	not very good. its chipped up like normal __________________ 1993 RX-7 Touring MB, stockport 13B-REW, 9.4CR rotors, T04S 60-1/p-trim single turbo 1986 RX-7 Base project track beast

06-11-2012, 08:52 PM	#13
88turboii destroy, rebuild, repeat Join Date: Feb 2008 Location: Charleston, SC Posts: 395 Rep Power: 18	shell is gone, but i still have the 10AE doors w/bronze glass, as well as bronze 10AE rear hatch __________________ 1993 RX-7 Touring MB, stockport 13B-REW, 9.4CR rotors, T04S 60-1/p-trim single turbo 1986 RX-7 Base project track beast

06-25-2013, 06:24 AM	#14
Raksj04 I have Ultra power in me. Join Date: Sep 2011 Posts: 457 Rep Power: 14	Do you still have rear capliers? I need both sides.

06-25-2013, 07:22 AM	#15
88turboii destroy, rebuild, repeat Join Date: Feb 2008 Location: Charleston, SC Posts: 395 Rep Power: 18	sorry everything is either gone or im using it on my new FC